S300 + Innovate LC2 Voltage Spikes Issues -=HELP=-
Re: S300 + Innovate LC2 Voltage Spikes Issues -=HELP=-
Does it have the correct component in C42
Re: S300 + Innovate LC2 Voltage Spikes Issues -=HELP=-
sure, i've installed this one capacitor
and did not see noticeable changes, because on D14 i see the same behaiviour.
As a temporary solution, I think in my place to change the resolution of the AFR to voltage by reprogramming the LC2 controller, also indicate this in SMANAGER.
For example, now I have 7.35-22.39, and do 10-20 for 0-5 volts. Then the voltage spikes at the inputs d12 and d14 will not affect the AFR values so much.
Any thoughts?
and did not see noticeable changes, because on D14 i see the same behaiviour.
As a temporary solution, I think in my place to change the resolution of the AFR to voltage by reprogramming the LC2 controller, also indicate this in SMANAGER.
For example, now I have 7.35-22.39, and do 10-20 for 0-5 volts. Then the voltage spikes at the inputs d12 and d14 will not affect the AFR values so much.
Any thoughts?