Page 1 of 1

Min/Max Long Term default settings incorrect?

Posted: Fri Jun 07, 2019 10:31 am
by creizlein
I always wondered why the default values (on all basemaps) for Min/Max adjustment for Long term are switched over?
Or I am misunderstanding something?

Note how the Min and Max for Long Term are switched?
Note how the Min and Max for Long Term are switched?
snap1076.png (7.17 KiB) Viewed 2285 times

For the short trim ones (second pair) they seem to be correct, the min is a smaller value than the max
But for the long term trim, for me, they are switched over, the min value is bigger than the max value? how come?

Was wondering if someone else also noticed this, I always change them both to -15/+15 as i do not want more than 15% correction on any of those, but was just curious

Re: Min/Max Long Term default settings incorrect?

Posted: Tue Jun 11, 2019 9:13 am
by Hondata
Yes, the values are swapped. We've fixed this for a future release.

Re: Min/Max Long Term default settings incorrect?

Posted: Wed Jun 12, 2019 5:12 pm
by creizlein
Glad it helped! Thanks for the quick fix.