very lean at idle after couple different upgrades, need help
Posted: Sun May 26, 2019 5:07 pm
Hi everyone,
So I am completely stumped at this moment.
1994 OBD1 Integra with B20/Vtec
Installed Skunk2 Ultra Street Manifold
Bigger TB
New Gaskets
Cylinder head was re-installed as well.
Upon startup, car runs very lean at idle.
I have flex fuel and wideband hooked up as well.
S.Trims tries to compensate, but does nothing.
I have also added up to 100% more fuel through the overall fuel trims, and still does nothing.
Sprayed carb cleaner all over the place, doesn't bog.
Like I said, at a complete loss.
See attached tune and datalog.
I don't think this has much to do with the S300 itself, but seeing if anyone can point me in the right direction.
Thank you.
So I am completely stumped at this moment.
1994 OBD1 Integra with B20/Vtec
Installed Skunk2 Ultra Street Manifold
Bigger TB
New Gaskets
Cylinder head was re-installed as well.
Upon startup, car runs very lean at idle.
I have flex fuel and wideband hooked up as well.
S.Trims tries to compensate, but does nothing.
I have also added up to 100% more fuel through the overall fuel trims, and still does nothing.
Sprayed carb cleaner all over the place, doesn't bog.
Like I said, at a complete loss.
See attached tune and datalog.
I don't think this has much to do with the S300 itself, but seeing if anyone can point me in the right direction.
Thank you.