Engine fires up fine. It will run normal until the motor gets to operating temperature and then will cut fuel or ignition at 2000rpm. All sensors are new. I have tried recalibrating the tps. Gone through the timing twice. I am new to hondata. Managed to figure out the datalog process and the file is attached.
B20B
RC 370cc
255lph Walbro
S2 IM
66TB
Engine cuts at 2000rpm
-
- Posts: 2
- Joined: Sun Apr 14, 2019 10:45 pm
Engine cuts at 2000rpm
- Attachments
-
- 2000rpm stall dtalog.s3d
- (2.38 MiB) Downloaded 99 times
-
- Posts: 155
- Joined: Tue Oct 10, 2006 10:13 pm
Re: Engine cuts at 2000rpm
TPS isn't working. it's staying at 0% for the entire datalog.
-
- Posts: 2
- Joined: Sun Apr 14, 2019 10:45 pm
Re: Engine cuts at 2000rpm
Switched the TPS out for the old unit and it seems to have fixed my issue. Thank you.