Page 2 of 2

Re: Setting idle speed and max rpm

Posted: Sat Apr 27, 2019 1:35 am
by Grigg1
Haha that makes sense for the idle issue then - i was under the impression Smanager could still control this idle rpm without the IAC, obviously not with your response.

Re: Setting idle speed and max rpm

Posted: Sat Apr 27, 2019 1:39 am
by Grigg1
Spunkster wrote:
Fri Apr 26, 2019 4:59 pm
Please describe the issue more clearly, as I do not understand.
Smanager-Parameters-Rev Limits-speed limiter

Under the above location there is a maximum rprm setting.

I have tried setting the rpm to something like 6000rpm to prove it works but it climbs way past this until i let off throttle

Re: Setting idle speed and max rpm

Posted: Sun Apr 28, 2019 6:53 am
by crluver123
Grigg1 wrote:
Sat Apr 27, 2019 1:39 am
Spunkster wrote:
Fri Apr 26, 2019 4:59 pm
Please describe the issue more clearly, as I do not understand.
Smanager-Parameters-Rev Limits-speed limiter

Under the above location there is a maximum rprm setting.

I have tried setting the rpm to something like 6000rpm to prove it works but it climbs way past this until i let off throttle
that is not the rev limiter. that is only used for the speed limiter.
the rev limiter is labelled rev limiter, at the top under that same tab.

Re: Setting idle speed and max rpm

Posted: Sun Apr 28, 2019 7:07 am
by BCMotors
Grigg1 wrote:
Sat Apr 27, 2019 1:39 am

Smanager-Parameters-Rev Limits-speed limiter

Under the above location there is a maximum rprm setting.
But that setting is in SManager, which we already determined you shouldn't be playing with...

Notice how it's in the box clearly labeled "speed limiter". And the first of the 3 boxes is labeled "Rev Limiter".

Ok, let's recap what we learned!!

1) idle air control, controls idle

2) speed limiter, limits speed

3) Rev limiter, limits revs

4) alt+ F4 will close SManager and save your engine from damage.

Re: Setting idle speed and max rpm

Posted: Sun Apr 28, 2019 9:29 pm
by crluver123
BCMotors wrote:
Sun Apr 28, 2019 7:07 am

4) alt+ F4 will close SManager and save your engine from damage.
HAHA! *thumbup*