Page 1 of 1

s300 datalogging not working when engine is on

Posted: Wed Jan 02, 2019 5:48 pm
by oksdesigns
s300 datalogging not working when engine is on

Upon starting the engine, smanager works properly as soon as the engine cranks over it stops logging, display screen- values remain the same from before engine starts and the lightning bolt becomes unable to click on until turn engine off and turn back on the ignition.

Car sat down couple months from time to time now this issue pops out of the blue

Re: s300 datalogging not working when engine is on

Posted: Thu Jan 03, 2019 10:08 am
by Spunkster
Are you using resistor or non-resistor type spark plugs?