Full throttle shift wiring
Posted: Fri Dec 21, 2018 7:58 am
All threads I found on this subject are unclear and/or incomplete. When wiring full throttle shift from the cruise control/clutch switch, there are two wires coming off of the switch. Does one go to ground and one to the input on the ecu? Does it matter what wire off the switch goes to ground/ecu input? Does anything need to be done with the original existing wire for the input, does it need to be grounded or just disconnected and left alone? Does Continuity to ground complete the circuit when input is not inverted or is it the other way around?