Page 1 of 1

Re: S300 red flashing light, and cant upload map

Posted: Thu Nov 29, 2018 5:59 pm
by Mario_eh2
Serial number is 45157
Sowftware version is 2.6.7

Re: S300 red flashing light, and cant upload map

Posted: Thu Nov 29, 2018 6:00 pm
by Mario_eh2
Also i plugged it into the car and turn the key and the LEDs on the board dont turn on oy if i plug it i to the ecu

Re: S300 red flashing light, and cant upload map

Posted: Thu Nov 29, 2018 8:25 pm
by Mario_eh2
Mario_eh2 wrote: Thu Nov 29, 2018 6:00 pm Also i plugged it into the car and turn the key and the LEDs on the board dont turn on only if i plug it i to the ecu

Re: S300 red flashing light, and cant upload map

Posted: Fri Nov 30, 2018 10:25 am
by Spunkster
Who socketed this ecu?

Re: S300 red flashing light, and cant upload map

Posted: Sat Dec 01, 2018 8:26 pm
by Mario_eh2
It got socketed at a computer place

Re: S300 red flashing light, and cant upload map

Posted: Mon Dec 03, 2018 11:57 am
by Spunkster
Was it tested when it was socketed and was it working then?

Re: S300 red flashing light, and cant upload map

Posted: Mon Dec 03, 2018 11:59 am
by Mario_eh2
No they only socketed the ecu

Re: S300 red flashing light, and cant upload map

Posted: Mon Dec 03, 2018 3:34 pm
by Spunkster
It sounds like it may be a socketing issue. Was J12 cut in the ECU?

Re: S300 red flashing light, and cant upload map

Posted: Mon Dec 03, 2018 8:18 pm
by Mario_eh2
Yes j12 was removed i bought another ecu and socketed it again and does the same thing.. is it normal for it to stay green at the top right corner Then flashing red at the bottom?

Re: S300 red flashing light, and cant upload map

Posted: Tue Dec 04, 2018 10:14 am
by Spunkster
Without the USB plugged in and it plugged into the car what lights show when you turn the key to the on position?