Blinking red light

s300 and SManager software questions & answers
Post Reply
dfarley1985
Posts: 3
Joined: Tue Mar 27, 2018 12:38 am

Blinking red light

Post by dfarley1985 » Tue Aug 28, 2018 7:02 pm

My hondata will not let me upload any tunes to the ECU. It says online but it won’t let me do anything with it. Please help
Attachments
0E175C0D-D9C2-4B65-AA4A-C6EDE4422BC4.jpeg
0E175C0D-D9C2-4B65-AA4A-C6EDE4422BC4.jpeg (2.85 MiB) Viewed 2094 times

User avatar
Spunkster
Site Admin
Posts: 18059
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Blinking red light

Post by Spunkster » Wed Aug 29, 2018 9:39 am

What is the serial number that is on the s300 board inside the ECU?

From Help, About, what is the version of software you are using?

dfarley1985
Posts: 3
Joined: Tue Mar 27, 2018 12:38 am

Re: Blinking red light

Post by dfarley1985 » Thu Aug 30, 2018 6:17 pm

42451 is the number on the board.
I have S300 v3 and I deleted and reinstalled smanager to make sure I had the latest version.

User avatar
Spunkster
Site Admin
Posts: 18059
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Blinking red light

Post by Spunkster » Fri Aug 31, 2018 9:13 am

But if you go to the Help menu and click on about, what is the actual version of software you are using?

dfarley1985
Posts: 3
Joined: Tue Mar 27, 2018 12:38 am

Re: Blinking red light

Post by dfarley1985 » Fri Aug 31, 2018 8:27 pm

I will check it in the morning and get back with you soon as I get home from work.

Neva2fast
Posts: 4
Joined: Mon Mar 11, 2019 5:10 pm

Re: Blinking red light

Post by Neva2fast » Mon Mar 11, 2019 5:23 pm

Spunkster wrote:
Fri Aug 31, 2018 9:13 am
But if you go to the Help menu and click on about, what is the actual version of software you are using?
Hello im having issue my self i plug hondata to just laptop and get a flashing red light but it worked one time befor witha diff laptop and im using newest firmware 2.6.7.0

User avatar
Spunkster
Site Admin
Posts: 18059
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Blinking red light

Post by Spunkster » Tue Mar 12, 2019 9:12 am

What is the serial number that is on the s300 board inside the ECU?

Neva2fast
Posts: 4
Joined: Mon Mar 11, 2019 5:10 pm

Re: Blinking red light

Post by Neva2fast » Tue Mar 12, 2019 3:07 pm

The serial number is 45812

Neva2fast
Posts: 4
Joined: Mon Mar 11, 2019 5:10 pm

Re: Blinking red light

Post by Neva2fast » Tue Mar 12, 2019 3:26 pm

A known turner here in florida installed it for me and put a base map for f20b stock motor and plugged it to car to show me it worked since then i just had it sitting in my closet untill yesterday i connected it to laptop to put stock d16 base map it just stays flashing red i click on the new calibration and click on d16 and click ok and doesnt do anything i go to calibration it shows its stored but nothing ever popped up ...so i connected ecu in car with laptop today and same shows me its connected car trys starting but starts rough then dies out i get a solid green with red flashing light this time

User avatar
Spunkster
Site Admin
Posts: 18059
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Blinking red light

Post by Spunkster » Wed Mar 13, 2019 9:41 am

From what you have said you have not actually uploaded to the ECU. With the calibration open you must click on the upload button at the top(up arrow).

Neva2fast
Posts: 4
Joined: Mon Mar 11, 2019 5:10 pm

Re: Blinking red light

Post by Neva2fast » Wed Mar 13, 2019 2:27 pm

Ive teied and nothing pops up the upload doesnt doesnt become bold to click on it ive hit f10 to see if upload pops up but still nothing

User avatar
Spunkster
Site Admin
Posts: 18059
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Blinking red light

Post by Spunkster » Wed Mar 13, 2019 3:52 pm

Who socketed this ECU?

Post Reply