Smanager gives extra fuel when throttle is rapidly opened

s300 and SManager software questions & answers
Post Reply
danielsvenningsen
Posts: 3
Joined: Wed Aug 08, 2018 9:58 pm

Smanager gives extra fuel when throttle is rapidly opened

Post by danielsvenningsen »

Hello Guys.

I am looking in to some problems, in smanager we have the "Throttle tip in trim", and that is good in the low RPM, but if it gets over 5-6000 RPM, it tip in way to much fuel.

I have tried put in 0%, but then it still puts in extra fuel in the high RPM, when the gas is rapidly opened.

Does anyone have a clue on where and if you can set the extra fuel somewhere else for the throttle ?

Attach is the injector signal, and in the middle i tried pump the gas very fast, and it put in WAY TO MÙCH fuel. but only if it fast from 0% throttle to 100%.

Kinds of
Daniel Svenningsen
Attachments
injector and throttle.JPG
injector and throttle.JPG (77.45 KiB) Viewed 437 times
4 træning.s3d
(3.75 MiB) Downloaded 33 times
Program.skl
(49.14 KiB) Downloaded 31 times
injector and throttle.JPG
injector and throttle.JPG (77.45 KiB) Viewed 440 times
Injectorsignal.JPG
Injectorsignal.JPG (93.65 KiB) Viewed 440 times
User avatar
Spunkster
Site Admin
Posts: 19338
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Smanager gives extra fuel when throttle is rapidly opened

Post by Spunkster »

The AF reading in the datalog is not changing. Do you have a wideband?
Post Reply