Page 1 of 1

Launch control questions

Posted: Fri Jun 22, 2018 9:11 am
by skaterguy1986
Are there any basic guidelines for setting this up? Just curious about the RPM target in relation to where the VTEC crossover is for a given engine. Wondering because I wouldn't want to damage the rockers or anything like that by having it attempt to switch to the high cam at a high RPM. Also curious about a recommended fuel and ignition setting for a relatively stockish engine.

Thanks.

Re: Launch control questions

Posted: Fri Jun 22, 2018 9:43 am
by Spunkster
IF it is a stock engine then do not make any changes to the fuel or ignition settings. Your VTEC settings should be adjusted such that it requires load for it to engage and free revving should not meet those settings.