S300 having issues datalogging and uploading ?

s300 and SManager software questions & answers
Kdotharrison
Posts: 12
Joined: Sat May 05, 2018 8:16 am

Re: S300 having issues datalogging and uploading ?

Post by Kdotharrison »

Spunkster wrote: Wed May 09, 2018 11:35 am Can you post the calibration and a datalog of it doing this as well?

Is J12 cut in the ECU?


MY ecu and hondata was done by evans tuning , i dont know anything about computer things , i will be at my tuners sunday , i can ask him
Kdotharrison
Posts: 12
Joined: Sat May 05, 2018 8:16 am

Re: S300 having issues datalogging and uploading ?

Post by Kdotharrison »

Spunkster wrote: Wed May 09, 2018 11:35 am Can you post the calibration and a datalog of it doing this as well?

Is J12 cut in the ECU?
here you go sir , my timing might be a little off on this one
Attachments
art.s3d
(1.37 MiB) Downloaded 85 times
User avatar
Spunkster
Site Admin
Posts: 22745
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: S300 having issues datalogging and uploading ?

Post by Spunkster »

Please post the calibration as well.
Kdotharrison
Posts: 12
Joined: Sat May 05, 2018 8:16 am

Re: S300 having issues datalogging and uploading ?

Post by Kdotharrison »

Spunkster wrote: Mon May 14, 2018 10:18 am Please post the calibration as well.
Everything is all situated . I want to thank you for the help and support Spunkster.

The issue seemed to be a hondata problem. The day i started having issues with hondata was the first time also using hondata with my car to tune, The hondata system forum's or anything associated with hondata was later shut down for maintenance or something with their system. I did not alter, add , or delete any wiring or anything at all. Simpy went back to my tuner on a different day (Yesterday) and everything worked out great. 272 hp on 10 psi b18c1 9.5.1 compression motor


Thank you again
Post Reply