s300 issue confused

s300 and SManager software questions & answers
Post Reply
hpmx18
Posts: 211
Joined: Tue Feb 17, 2009 6:47 am
Location: U.S.A

s300 issue confused

Post by hpmx18 »

serial number 8160
software version 2.3.3.0

not able to data log to provide attachment

ecu is a P06
honda civic 1998
b18b bone stock no bolt-ons

while the ecu is plugged in, solid red cell from board, also when attempting to datalog no data is displayed and car is missing or on 3cylinders i tried getting info from ecu 1 time shows info other time nothing is displayed and i tried different ecu with same result, and also tried different s300 board in same ecu and it works flawlessly so ecu is not problem

any help is appreciated
Attachments
error2.png
error2.png (88.58 KiB) Viewed 1236 times
error.png
error.png (88.69 KiB) Viewed 1236 times
test s300.skl
(40.57 KiB) Downloaded 31 times
LGMotoring

User avatar
Spunkster
Site Admin
Posts: 18281
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: s300 issue confused

Post by Spunkster »

Go to the online menu and try to erase the ECU. When that finishes, close the program and then reopen it and go to New Calibration. load one of the base calibrations and then upload to the ECU and see if that resolves the issue.

hpmx18
Posts: 211
Joined: Tue Feb 17, 2009 6:47 am
Location: U.S.A

Re: s300 issue confused

Post by hpmx18 »

Spunkster wrote:Go to the online menu and try to erase the ECU. When that finishes, close the program and then reopen it and go to New Calibration. load one of the base calibrations and then upload to the ECU and see if that resolves the issue.
that was 1 of the first things that i did and just did it 1 last time before i created this thread still no help
LGMotoring

User avatar
Spunkster
Site Admin
Posts: 18281
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: s300 issue confused

Post by Spunkster »

Send an email to support <at> hondata.com with the following and I will issue an RMA and give you further
instructions (include a link to this thread):

Name:
Address:
Phone:
Email:
Serial#:
Description of Problem:

hpmx18
Posts: 211
Joined: Tue Feb 17, 2009 6:47 am
Location: U.S.A

Re: s300 issue confused

Post by hpmx18 »

Spunkster wrote:Send an email to support <at> hondata.com with the following and I will issue an RMA and give you further
instructions (include a link to this thread):

Name:
Address:
Phone:
Email:
Serial#:
Description of Problem:

cool appreciate it
LGMotoring

Post Reply