Hi guys,
I got a D16z6 with vitara internals w/ Greddy TD04 kit
I started a new calibration and started engine
Engine starts but it is leaning out.
I think it is because the engine is cold.
Is there something on the parameter that I need to adjust?
Also if you can provide me a link that would be very helpful.
Thanks.
Lean Start cold engine
Re: Lean Start cold engine
check the fuel compensation tab for water temp & air temp
LGMotoring
IG:Lgmotoring
Lgmotoring.com
IG:Lgmotoring
Lgmotoring.com
-
- Posts: 14
- Joined: Mon Nov 14, 2011 7:26 am
Re: Lean Start cold engine
I didn't play with them. Hints on this? Thanks.hpmx18 wrote:check the fuel compensation tab for water temp & air temp
Re: Lean Start cold engine
let the car cool down to where its cold enough to duplicate the same symptoms and see wat table needs a bigger % on the same tab i was referring toyangeghatch wrote:I didn't play with them. Hints on this? Thanks.hpmx18 wrote:check the fuel compensation tab for water temp & air temp
LGMotoring
IG:Lgmotoring
Lgmotoring.com
IG:Lgmotoring
Lgmotoring.com
-
- Posts: 27
- Joined: Thu Feb 28, 2008 6:54 am
- Location: Guayama P.R.
- Contact:
Re: Lean Start cold engine
First check if the coolant sensor is connected and working.
Integra 96 B20 Vtec nitrous 115hp 260hp total 12.00ET 115MPH Stock internals hondata S300
-
- Posts: 14
- Joined: Mon Nov 14, 2011 7:26 am
Re: Lean Start cold engine
Still haven't had a chance to try it out yet...
Do you guys usually leave this area stock when tuning or did you guys add more fuel?
How much do you usually add? ( I know it varies between setup just want an idea)
Thanks.
Do you guys usually leave this area stock when tuning or did you guys add more fuel?
How much do you usually add? ( I know it varies between setup just want an idea)
Thanks.