Page 1 of 1
S300 with Multi-Coil with AEM EPM, is how?
Posted: Tue Jan 24, 2012 10:45 pm
by HeitorVTiBR
Ola .. is possible using multi-coil using the AEM EPM with hondata S300, OBD1?
Re: S300 with Multi-Coil with AEM EPM, is how?
Posted: Wed Jan 25, 2012 9:32 am
by Hondata
The s300 does not change the Honda ECU hardware, so the answer this question is 'does the AEM EPM work with a stock Honda ECU?'
Re: S300 with Multi-Coil with AEM EPM, is how?
Posted: Wed Jan 25, 2012 8:48 pm
by HeitorVTiBR
I know, is that the AEM EPM will spot the original distributor, serving only to capture the signal of the motor position ...
I want to remove the distributor and use four coils, one per cylinder .. is it possible?
Re: S300 with Multi-Coil with AEM EPM, is how?
Posted: Thu Jan 26, 2012 7:30 am
by surfingsk8r
Hondata CPR, I hear that it works great.
Re: S300 with Multi-Coil with AEM EPM, is how?
Posted: Fri Feb 10, 2012 9:30 pm
by HeitorVTiBR
surfingsk8r wrote:Hondata CPR, I hear that it works great.
But four coils is used? or only a distributor with one coil?
Re: S300 with Multi-Coil with AEM EPM, is how?
Posted: Sat Feb 11, 2012 8:07 am
by Hondata