S300 with Multi-Coil with AEM EPM, is how?

s300 and SManager software questions & answers
Post Reply
HeitorVTiBR
Posts: 45
Joined: Wed May 26, 2010 10:13 pm

S300 with Multi-Coil with AEM EPM, is how?

Post by HeitorVTiBR »

Ola .. is possible using multi-coil using the AEM EPM with hondata S300, OBD1?
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: S300 with Multi-Coil with AEM EPM, is how?

Post by Hondata »

The s300 does not change the Honda ECU hardware, so the answer this question is 'does the AEM EPM work with a stock Honda ECU?'
Hondata
HeitorVTiBR
Posts: 45
Joined: Wed May 26, 2010 10:13 pm

Re: S300 with Multi-Coil with AEM EPM, is how?

Post by HeitorVTiBR »

I know, is that the AEM EPM will spot the original distributor, serving only to capture the signal of the motor position ...

I want to remove the distributor and use four coils, one per cylinder .. is it possible?
surfingsk8r
Posts: 52
Joined: Tue Jul 26, 2011 7:00 am

Re: S300 with Multi-Coil with AEM EPM, is how?

Post by surfingsk8r »

Hondata CPR, I hear that it works great.
HeitorVTiBR
Posts: 45
Joined: Wed May 26, 2010 10:13 pm

Re: S300 with Multi-Coil with AEM EPM, is how?

Post by HeitorVTiBR »

surfingsk8r wrote:Hondata CPR, I hear that it works great.
But four coils is used? or only a distributor with one coil?
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: S300 with Multi-Coil with AEM EPM, is how?

Post by Hondata »

Hondata
Post Reply