S300 with bosch LSU4.2 direct connection

s300 and SManager software questions & answers
Post Reply
ludoracingteam
Posts: 3
Joined: Thu Aug 26, 2010 3:27 am

S300 with bosch LSU4.2 direct connection

Post by ludoracingteam » Thu Aug 26, 2010 4:02 am

Hi,

What happens if we plug a Bosch LSU 4.2 WB with the OEM connector plug into stock wiring?

So the WB is directly connected to S300 without WB controller.
I want to know if it's possible, and if not i want to understand why.

Because a Bosch WB is $60, whereas LC-1 kit is $200.

User avatar
Spunkster
Site Admin
Posts: 18059
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Post by Spunkster » Thu Aug 26, 2010 10:39 am

It will not work. You must use a wideband sensor and controller for the sensor to function. We recommend the PLX devices widebands.

dowt
Posts: 6
Joined: Wed Jul 11, 2018 5:01 pm

Re: S300 with bosch LSU4.2 direct connection

Post by dowt » Wed Aug 01, 2018 6:19 pm

Is this still true?

User avatar
Spunkster
Site Admin
Posts: 18059
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: S300 with bosch LSU4.2 direct connection

Post by Spunkster » Thu Aug 02, 2018 9:58 am

yes

Post Reply