UK Civic Type-R EP3 with JRSC and 650cc RC's + datalog graph

K-Series Programmable ECU Calibration updates / downloads
Locked
chippyleigh
Posts: 8
Joined: Wed Mar 14, 2007 7:28 am
Location: UK

UK Civic Type-R EP3 with JRSC and 650cc RC's + datalog graph

Post by chippyleigh » Wed May 02, 2007 4:29 am

Hi there, I am after a map for the following :-

UK Civic Type-R EP3
JRSC s/c (civic si race model)
650cc RC injectors
Toda Header
Spoon N1 catback
PRB ecu with wideband lambda
97-98 octane fuel

We have tried using K20a2-rsx-650cc-jrsc-10-psi but are getting knock when revs drop down from 7000 rpm.

On the last run datalogging lambda gave 11.5 to 14.70

Any ideas on a better map would be appreciated.

Darren
Last edited by chippyleigh on Fri May 04, 2007 4:03 am, edited 1 time in total.

User avatar
Spunkster
Site Admin
Posts: 18080
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Post by Spunkster » Wed May 02, 2007 9:33 am

For a setup like this, you will have to tune it on the dyno.

chippyleigh
Posts: 8
Joined: Wed Mar 14, 2007 7:28 am
Location: UK

Post by chippyleigh » Thu May 03, 2007 3:04 am

Spunkster wrote:For a setup like this, you will have to tune it on the dyno.
I understand this but I wanted another map for this setup until we can get on a dyno, over here in the UK some people are charging over ?400 for a dyno tune (they won't do it by the hour) which is just over $800 so a more suited map to get us by would be appreciated.

I have also noticed that knocks seem to be evident when changing gear, ie when boost drops off that is when knocks are present.

The datalog File :-

Image

chippyleigh
Posts: 8
Joined: Wed Mar 14, 2007 7:28 am
Location: UK

Post by chippyleigh » Thu May 10, 2007 8:20 am

anybody ??

scottishpol
Posts: 40
Joined: Fri Jul 01, 2005 5:39 pm

Post by scottishpol » Thu May 10, 2007 9:39 am

Where abouts are you in the UK?

I can get you dyno time at a very reasonable price up here in Scotland.

chippyleigh
Posts: 8
Joined: Wed Mar 14, 2007 7:28 am
Location: UK

Post by chippyleigh » Thu May 10, 2007 1:25 pm

scottishpol wrote:Where abouts are you in the UK?

I can get you dyno time at a very reasonable price up here in Scotland.
Its for a mate and he lives just north of Manchester.

trlaing
Posts: 39
Joined: Mon Oct 08, 2007 9:45 am

Re: UK Civic Type-R EP3 with JRSC and 650cc RC's + datalog g

Post by trlaing » Mon Oct 08, 2007 9:51 am

chippyleigh wrote:Hi there, I am after a map for the following :-

UK Civic Type-R EP3
JRSC s/c (civic si race model)
650cc RC injectors
Toda Header
Spoon N1 catback
PRB ecu with wideband lambda
97-98 octane fuel

We have tried using K20a2-rsx-650cc-jrsc-10-psi but are getting knock when revs drop down from 7000 rpm.

On the last run datalogging lambda gave 11.5 to 14.70

Any ideas on a better map would be appreciated.

Darren
Hi

Did you ever find a better map for your setup? I have the same JRSC kit with ITG Maxogen air filter, standard exhaust manifold, DC Sports catback. When I received my K-Pro there was a problem with the map so I was told to upload the same one you are using. I haven't driven it yet but it seems to start and rev fine. I have to drive 460 miles to get it mapped so would like a good base map so it survives the journey!

Any help would be much appreciated!

Teamko
Posts: 13
Joined: Tue Jul 04, 2006 5:26 pm
Location: west reading pa
Contact:

Post by Teamko » Mon Oct 08, 2007 8:40 pm

send me datalog and current map I can optimizm your tune.

Locked