K20a2-KproV4-n/a-1000cc-Larger fuel rail-Full exhaust-Intake manifold-Throttle Body-CAI
Posted: Fri Mar 08, 2019 11:55 am
Good afternoon,
I have found a base map that starts the car however, its far to rich and has fouled the O2 sensor within 5 starts at no longer than 1 min runtime each.
The current map I have also does not run well enough to have any throttle control. (its not a safe map to continue using), much less to drive with.
Im looking for something safe to get the car to a tuner. the following is what the car has:
The engine and ECU is K20A2 with KproV4 on a 2004 Acura RSX type S.
Skunk2 alpha header,
q300 cat back,
Injen CAI,
Skunk2 74 mill throttle body,
Skunk 2 ultra street manifold,
Grams 1000cc injectors,
Hybrid racing larger fuel rail.
If you are able to help I would appreciate it.
I am currently at work and will try uploading the current map once I get home. (should be about 3.5-4 hours)
Either way thank you in advance.
Steven Sorvillo
I have found a base map that starts the car however, its far to rich and has fouled the O2 sensor within 5 starts at no longer than 1 min runtime each.
The current map I have also does not run well enough to have any throttle control. (its not a safe map to continue using), much less to drive with.
Im looking for something safe to get the car to a tuner. the following is what the car has:
The engine and ECU is K20A2 with KproV4 on a 2004 Acura RSX type S.
Skunk2 alpha header,
q300 cat back,
Injen CAI,
Skunk2 74 mill throttle body,
Skunk 2 ultra street manifold,
Grams 1000cc injectors,
Hybrid racing larger fuel rail.
If you are able to help I would appreciate it.
I am currently at work and will try uploading the current map once I get home. (should be about 3.5-4 hours)
Either way thank you in advance.
Steven Sorvillo