Hello,
I'm about to start a K20a3 with BC 0050 N/A cams for the first time. The goal is to get it running well enough to drive 50 miles on the highway to get it tuned.
I understand the theory of what will be necessary to get this setup working, how to monitor the sensors, adjust tables, etc. However, I have no experience doing any of it... Maybe one of you guys have some tips for what to look/listen for, etc.
Cheers
k20a3, BC0050 Cams - First Start
k20a3, BC0050 Cams - First Start
Last edited by bemmis on Wed Jun 07, 2017 5:39 pm, edited 1 time in total.
Re: k20a3, BC0050 Cams - First Start
The plan is to tune based off the a3 high octane tune, monitor the sensor values, and adjust as needed.
The purpose of this topic is to find someone who has experience with this who knows that X will be helpful/necessary with a setup like this (i.e. stuff to do off the bat).
The purpose of this topic is to find someone who has experience with this who knows that X will be helpful/necessary with a setup like this (i.e. stuff to do off the bat).