Help with 2.4L F-series stroker

K-Series Programmable ECU Calibration updates / downloads
Post Reply
spoon.ap1
Posts: 18
Joined: Sat Sep 19, 2015 8:49 pm

Help with 2.4L F-series stroker

Post by spoon.ap1 »

I recently built a 2.4L motor for my AP1. Once the motor was in I got it towed to the tuner who did a tune to 5k rpm for the break in. I now have over 1500kms on the motor. I recently spoke to him an he said I need to bring the car in for the full tune. I also had a friend from another reputable shop tell me that I should be able to copy the current tune and adjust the fuel for the rest of my rpms or add 15-20% fuel to the ap1 base map. So I was able to make a copy and raise the limiter to 7900rpms but I have no idea what to do with the fuel. Is there anyone that can help me?

Side note: The reason I do t want to get a full tune yet is because I have supercharger I plan on slapping on that won't be ready for a while. Just want to be able to see what the cars got past 5k rpms. Ill provide a picture of the fuel map. Thanks!

F20C motor stroked to 2.4L, 9.9:1
Sleeved
Forged pistons
K24 crank
Custom rods
Stock head
Post Reply