I'm trying to setup Fuel Percent Level using K-Pro V4 and AEM CD-5 Dash.
I also have a ICM Fuel Sender Unit: https://ironcanyonmotorsports.com/icm-fuel-sender/
From research here are my ohms values for Empty: 4080 and Full: 252 on an 1994 Acura Integra GS-R.
The issue is I'm getting a reading on my cluster showing 100% without the fuel plugged in and I'm not quite sure if I set the Analog0 Channel correctly.
Do I put Custom for conversion, Percent for type/unit and do I need to put anything for custom input?
Using K-Pro V4 Analog Channel for Fuel
Re: Using K-Pro V4 Analog Channel for Fuel
How is the K-Pro communicating to the dash?
Re: Using K-Pro V4 Analog Channel for Fuel
I did my best and follow this install and was told that the fuel works the way they wired it (same exact way as me).
https://www.youtube.com/watch?v=_IXzn1CFKf4
https://www.youtube.com/watch?v=_IXzn1CFKf4
Re: Using K-Pro V4 Analog Channel for Fuel
If it works for them and not in your setup, then something is different.