So, with The stock calibrations dont work The tps adjustment? Right?Spunkster wrote:You need to have your calibration loaded and datalog to be able to calibrate it. Then when you are done you must upload the calibration to the ECU.
KManager V3.2.4 (beta)
Re: KManager V3.2.2 (beta)
Re: KManager V3.2.2 (beta)
You can calibrate the TPS with any calibration.
Re: KManager V3.2.2 (beta)
I reloaded 3.2.2 and took a screen shot, as you can see the error message.
The error message only appears when I plug the USB into the laptop, the ign does not need to be on either.
The error message only appears when I plug the USB into the laptop, the ign does not need to be on either.
- Attachments
-
- 3.2.2 Problem.png (62.09 KiB) Viewed 4454 times
Re: KManager V3.2.2 (beta)
Do you have any anti-virus software running?
Re: KManager V3.2.2 (beta)
No anti virus programs on this laptop.
Its a dell Running windows 7
Its a dell Running windows 7
Re: KManager V3.2.2 (beta)
Can you try a freind's laptop?
Re: KManager V3.2.2 (beta)
i manage to get it working now.
Re: KManager V3.2.2 (beta)
what was the solution?
Re: KManager V3.2.2 (beta)
it gave me another error code which didnt close the program, it connected with the ECU, but i had to upload the kal because it was two different versions, after doing this its back to normal and now this last version (3.2.2) works for me.
what exactly was the problem? I have no idea.
what exactly was the problem? I have no idea.
Re: KManager V3.2.2 (beta)
- serial number of your K-Pro
11084
- ECU part number (starts with 37820) and serial number (the number under the part number)
37820-PRA-E12
188226-4113
- KManager version (not 'the latest')
3.2.2
- a specific description of the problem
After upgrading from Kmanager 3.2.0 to the latest beta 3.2.2 (Win7 Starter/32bit on a Netbook) it's no longer possible to download the copy of the calibration stored on the K-proV3 board itself (not from the ECU) using the K-pro information window.
Kmanager communicates fine with the K-pro board and gets all the relevant information, but when trying to download, the LED on K-pro lights up and alternates (infinitely) between bright and dimmed as if it's stuck in an infinite loop of reading the same over and over again.
(if it's supposed alternate red-green.. that's a bit tricky as I'm mostly red-green color-blind so I can't really tell :) ).
ECU is currently on my desk, so not installed in any car...
(oh.. BTW.. Different, cosmetic thing: It seems the comment/description field displayed in the K-pro window for the stored calibration is truncated quite severely compared to the full comment stored inside the calibration...)
Workaround/fix: download & install 'production' Kmanager 3.1.6 and it will download the calibration from the Kpro board normally. That works fine.
Speculation:
Possible side-effect or leftover of the earlier (v3.2.1) 'can not load PRA calibration files' problem that was fixed in 3.2.2?
Bye, Arno.
11084
- ECU part number (starts with 37820) and serial number (the number under the part number)
37820-PRA-E12
188226-4113
- KManager version (not 'the latest')
3.2.2
- a specific description of the problem
After upgrading from Kmanager 3.2.0 to the latest beta 3.2.2 (Win7 Starter/32bit on a Netbook) it's no longer possible to download the copy of the calibration stored on the K-proV3 board itself (not from the ECU) using the K-pro information window.
Kmanager communicates fine with the K-pro board and gets all the relevant information, but when trying to download, the LED on K-pro lights up and alternates (infinitely) between bright and dimmed as if it's stuck in an infinite loop of reading the same over and over again.
(if it's supposed alternate red-green.. that's a bit tricky as I'm mostly red-green color-blind so I can't really tell :) ).
ECU is currently on my desk, so not installed in any car...
(oh.. BTW.. Different, cosmetic thing: It seems the comment/description field displayed in the K-pro window for the stored calibration is truncated quite severely compared to the full comment stored inside the calibration...)
Workaround/fix: download & install 'production' Kmanager 3.1.6 and it will download the calibration from the Kpro board normally. That works fine.
Speculation:
Possible side-effect or leftover of the earlier (v3.2.1) 'can not load PRA calibration files' problem that was fixed in 3.2.2?
Bye, Arno.
Re: KManager V3.2.2 (beta)
This works normally again with Kmanager 3.2.3 which was released recently.Arno wrote: After upgrading from Kmanager 3.2.0 to the latest beta 3.2.2 (Win7 Starter/32bit on a Netbook) it's no longer possible to download the copy of the calibration stored on the K-proV3 board itself (not from the ECU) using the K-pro information window.
Thanks!
Bye, Arno.
-
- Posts: 95
- Joined: Wed Jul 15, 2009 11:09 am
Re: KManager V3.2.4 (beta)
Is that a typo on the 3.2.4 update? I don't get it.
Re: KManager V3.2.4 (beta)
V3.2.4 is adding new valuable feature for PRA users.
Please see this topic: viewtopic.php?f=12&t=14110
Cheers
Dan
Please see this topic: viewtopic.php?f=12&t=14110
Cheers
Dan
Civic Type R EP3:
http://www.honda-club.cz/forum/garage.p ... cle&CID=37
http://www.honda-club.cz/forum/garage.p ... cle&CID=37