05/06 rsx type-s reflash question

Questions / support for the K-Series ECU re-flash
Locked
ASSALBERT
Posts: 14
Joined: Wed Nov 15, 2006 12:47 pm

05/06 rsx type-s reflash question

Post by ASSALBERT » Thu Apr 16, 2009 6:54 pm

i would like to know what you guys consider "lean" to be. because you guys say that the 05/06 rsx-s with a race header and reflash will run lean. yet i remember doug telling me that you guys run your afr at 14 in you're k20 engines. so my question is, what is too lean?

User avatar
Hondata
Site Admin
Posts: 8775
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Post by Hondata » Fri Apr 17, 2009 7:38 am

This has been answered many times. Adding a race header to the reflash will make it run lean. It won't be any leaner than stock, but it still will be lean. If you want to find out how lean, you'll need to put the car on a dyno with wideband. We cannot guess what the exact lambda will be.
Hondata

ASSALBERT
Posts: 14
Joined: Wed Nov 15, 2006 12:47 pm

Post by ASSALBERT » Fri Apr 17, 2009 10:56 am

so then what air to fuel ratio would you consider to be "lean" some people think 13.5:1 is lean, others think 14:1 is lean, what do you consider lean?

daDude
Posts: 4
Joined: Tue Apr 28, 2009 11:40 am

Post by daDude » Wed May 20, 2009 10:17 am

I have heard that with a shorty header, you will not run lean. Is this true or false?

User avatar
Hondata
Site Admin
Posts: 8775
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Post by Hondata » Thu May 21, 2009 7:17 am

You'll run leaner the optimum in the mid range, but it probably is not going to be a problem. As always, a dyno will tell you.
Hondata

Locked