Injector Driver Box
Re: Injector Driver Box
It has not officially been released as we are still waiting on packaging.
Re: Injector Driver Box
OKHondata wrote:Yes, that looks good.
What price?
Cr-v RD8+K24A2turbo+Kpro V4 prb+NPR3/6Speed+ТС+ HFS4 v3.2.
DynoWheel = 472kW / 589 N.m
HRX One Mile Challenge = Max Speed 282km
Known as Sniper
DynoWheel = 472kW / 589 N.m
HRX One Mile Challenge = Max Speed 282km
Known as Sniper
-
- Posts: 3
- Joined: Wed May 27, 2015 6:24 pm
Re: Injector Driver Box
hello! I've tried to buy the Injector Driver box but webpage says "out of stock".
Re: Injector Driver Box
The injector driver has now been released.
Re: Injector Driver Box
Wired it up today and plumbed injectors! No turbo yet so no test yet.
You do not have the required permissions to view the files attached to this post.
www.MSSRACING.com
9.29 | 6.20 | 167
9.29 | 6.20 | 167
Re: Injector Driver Box
Few questions:
1: is there a way to setup an indicator on the display to show when the staged injectors are active and also in data logs?
2: what should I expect to see in the data logs for injector duty cycle? Should they drop off instantly but maintain the same fuel delivery amounts since it's compensating for another set of injectors?... Giving me headroom to continue adding fuel where needed?
3: what would happen if I selected the option to run them in parallel verses staged? Would my car just die or does hondata calculate and compensate based on sizes selected?
This helps me to know what to expect as I go to make this work this week on the dyno and track.
1: is there a way to setup an indicator on the display to show when the staged injectors are active and also in data logs?
2: what should I expect to see in the data logs for injector duty cycle? Should they drop off instantly but maintain the same fuel delivery amounts since it's compensating for another set of injectors?... Giving me headroom to continue adding fuel where needed?
3: what would happen if I selected the option to run them in parallel verses staged? Would my car just die or does hondata calculate and compensate based on sizes selected?
This helps me to know what to expect as I go to make this work this week on the dyno and track.
www.MSSRACING.com
9.29 | 6.20 | 167
9.29 | 6.20 | 167
Re: Injector Driver Box
1. Use the indicator for the output used (ACC, PCS, IAB, FANC etc).
2. There is some correction for wall deposits, but injector duration and duty cycle will drop instantly. Fuel delivery stays the same.
3. The s300 would not need to control the injectors, so staged injection is not enabled and you would change the injector dead times. Gets more difficult with mis-matched injectors, but can be done.
2. There is some correction for wall deposits, but injector duration and duty cycle will drop instantly. Fuel delivery stays the same.
3. The s300 would not need to control the injectors, so staged injection is not enabled and you would change the injector dead times. Gets more difficult with mis-matched injectors, but can be done.
Hondata
Re: Injector Driver Box
Huge bug: turn on staged, set the settings....save the file....close hondata...reopen file, it's like I never turned it on. It uploads what I set it to but will not save it in the file.
Bug 2: set rpm and boost settings based on psi for the load....save the file...it reverts back to Kpa and a number for Kpa it decides to put.
I took a video of bug 1.
Bug 2: set rpm and boost settings based on psi for the load....save the file...it reverts back to Kpa and a number for Kpa it decides to put.
I took a video of bug 1.
www.MSSRACING.com
9.29 | 6.20 | 167
9.29 | 6.20 | 167