2013+ Accord Flashpro
2013+ Accord Flashpro
Is this on schedule for the start of this month? I see that any mention of it was removed from the Hondata news page.
Re: 2013+ Accord Flashpro
The 4 cylinder is done and released and the we're still working on the 6 cylinder.
Hondata
Re: 2013+ Accord Flashpro
Do you expect to have speed density/VE fueling on the 6 cylinder models?Hondata wrote:The 4 cylinder is done and released and the we're still working on the 6 cylinder.
Re: 2013+ Accord Flashpro
Yes. The difficulty factor is that some have two copies of the ignition & knock tables for VCM.
Hondata
Re: 2013+ Accord Flashpro
I see how VCM would get in the way...well I have a 2015 V6 6MT and I'm anxiously awaiting flashpro, so hopefully it'll come out soon.Hondata wrote:Yes. The difficulty factor is that some have two copies of the ignition & knock tables for VCM.
Re: 2013+ Accord Flashpro
Great! Keep me in the loop? (As if I'm remotely important...)Hondata wrote:It is real, we are dynoing the V6 this week.
Re: 2013+ Accord Flashpro
The V6 is pretty much done. There's a set of closed loop & injector sensors for each cylinder bank, and in VCM mode you can see one bank shut down with the injector duration going to 0. Front and rear banks run about the same lambda and fuel trims most of the time. You can also switch off VCM operation if you wish.
We have to get the calibrations & dyno information together for release, which will take about another week.
We have to get the calibrations & dyno information together for release, which will take about another week.
Hondata
-
- Posts: 1
- Joined: Fri Jun 05, 2015 12:22 am
Re: 2013+ Accord Flashpro
how about INT VERSION?
for K24W4 T_T
Thanks
for K24W4 T_T
Thanks
Re: 2013+ Accord Flashpro
Hello,
Can you please tell me if the Hondata Flash Pro will work with the Honda Crosstour V6?
An example ECU part number is 37820-R53-A75, and that is for a 2014 Crosstour AWD V-6 EX-L. I'm not sure of variances in other model years, but the Crosstour switched the V6 to the Earth Dreams starting in 2013.
If the Flash Pro is not compatible, do you have a different model programmer that would work?
I'm interested in tuning, and I know others are interested in disabling VCM without "tricking" the engine temperature sensor signal to the ECU, like some creative folks have offered as a "solution".
Thanks in advance!
Can you please tell me if the Hondata Flash Pro will work with the Honda Crosstour V6?
An example ECU part number is 37820-R53-A75, and that is for a 2014 Crosstour AWD V-6 EX-L. I'm not sure of variances in other model years, but the Crosstour switched the V6 to the Earth Dreams starting in 2013.
If the Flash Pro is not compatible, do you have a different model programmer that would work?
I'm interested in tuning, and I know others are interested in disabling VCM without "tricking" the engine temperature sensor signal to the ECU, like some creative folks have offered as a "solution".
Thanks in advance!
Re: 2013+ Accord Flashpro
Thanks, but that's sad news. ;(