Search found 22596 matches
- Wed Mar 20, 2024 1:50 pm
- Forum: S300 Calibrations
- Topic: D15B7 calibration
- Replies: 3
- Views: 57
Re: D15B7 calibration
You could try it.
- Wed Mar 20, 2024 9:46 am
- Forum: S300 Calibrations
- Topic: D15B7 calibration
- Replies: 3
- Views: 57
Re: D15B7 calibration
I would recommend that you try to get the unlocked calibration from whoever tuned it. If you cannot, then you will need to start with a new calibration and properly tune it.
- Wed Mar 20, 2024 9:43 am
- Forum: s300 / SManager
- Topic: Bad idle switching over to hondata
- Replies: 1
- Views: 104
Re: Bad idle switching over to hondata
With the idle controller unplugged, what RPM does it idle at?
- Wed Mar 20, 2024 9:42 am
- Forum: K-Pro / KManager
- Topic: VCC3 for 5 volt reference
- Replies: 3
- Views: 258
Re: VCC3 for 5 volt reference
The version 1 K-Pro does not have any additional inputs like the version 4 does.
- Wed Mar 20, 2024 9:41 am
- Forum: FlashPro Manager
- Topic: 2011 acura rdx to a 2024 integra aspec
- Replies: 2
- Views: 61
Re: 2011 acura rdx to a 2024 integra aspec
I'm sorry, but that FlashPro cannot be used on an Integra. You will have to purchase the correct FlashPro for the new vehicle.
- Tue Mar 19, 2024 11:04 am
- Forum: s300 / SManager
- Topic: CAN information from S300
- Replies: 4
- Views: 92
Re: CAN information from S300
Details on the CAN output can be found in the help file at: https://hondata.com/help/smanager/can_output.htm
- Tue Mar 19, 2024 11:00 am
- Forum: Civic Si 2006-2011 Americas
- Topic: basemaps won't start
- Replies: 5
- Views: 152
Re: basemaps won't start
With everything plugged in and the ignition in the on position, go to the Help menu and click on “send feedback”. Include a detailed description of the issue.
- Tue Mar 19, 2024 10:58 am
- Forum: K-Pro / KManager
- Topic: PNF US Ep3 Reverse Lockout
- Replies: 1
- Views: 60
Re: PNF US Ep3 Reverse Lockout
The PNF ECU does not have an output that will work with this.
- Tue Mar 19, 2024 10:56 am
- Forum: s300 / SManager
- Topic: starter issue 98 integra
- Replies: 1
- Views: 84
Re: starter issue 98 integra
It sounds like there is most likely a wiring issue that needs to be addressed.
- Mon Mar 18, 2024 11:36 am
- Forum: FlashPro Calibrations
- Topic: basemap download help for a newbie!
- Replies: 2
- Views: 90
Re: basemap download help for a newbie!
Close all instances of FlashPro manager running and the only open one copy.
- Mon Mar 18, 2024 11:29 am
- Forum: K-Pro / KManager
- Topic: VCC3 for 5 volt reference
- Replies: 3
- Views: 258
Re: VCC3 for 5 volt reference
I would recommend tapping the wire.
This cannot be done on the v1 s300.
This cannot be done on the v1 s300.
- Mon Mar 18, 2024 11:27 am
- Forum: s300 / SManager
- Topic: Upload botton grayed out can't upload
- Replies: 1
- Views: 119
Re: Upload botton grayed out can't upload
There appears to be a jumper on J12 and it must be removed.
- Fri Mar 15, 2024 4:14 pm
- Forum: FlashPro Manager
- Topic: Switching from ktuner
- Replies: 3
- Views: 7983
Re: Switching from ktuner
With everything plugged in and the ignition in the on position, go to the Help menu and click on “send feedback”. Include a detailed description of the issue.
Post the FlashPro serial number here.
Post the FlashPro serial number here.
- Thu Mar 14, 2024 12:23 pm
- Forum: FlashPro Calibrations
- Topic: K24A swap ignition question
- Replies: 1
- Views: 118
Re: K24A swap ignition question
It should not matter which ones are used.
- Thu Mar 14, 2024 9:42 am
- Forum: Civic Si 2012-2015 US/Canadian / 2013+ ILX
- Topic: ECU "FORGETTING" FLASH
- Replies: 3
- Views: 243
Re: ECU "FORGETTING" FLASH
answered via email