Search found 120 matches

by mladjan
Tue Jan 31, 2017 7:41 am
Forum: Civic Type R 2007-2011 European FN2
Topic: Open/Closed loop
Replies: 11
Views: 15654

Open/Closed loop

I see that this is different then in KPro where I can set open or closed loop. I don't see this settings in flash pro. Everything I see is ability to map WOT maps which are in open loop, and maps witch define when to switch to open loop. Am I right? What is not clear for me, is mapping part, how I c...
by mladjan
Sat Jan 07, 2017 7:00 am
Forum: K-Pro / KManager
Topic: Map pressure drop after 6500rpm
Replies: 5
Views: 1765

Re: Map pressure drop after 6500rpm

Yes, I have two logs attached. Take a look at WOT around 7-8.5k rpm
autoput log.kdl
(1.53 MiB) Downloaded 147 times
autoput 2 - 8.kdl
(2.94 MiB) Downloaded 146 times
by mladjan
Sun Dec 25, 2016 4:53 pm
Forum: K-Pro / KManager
Topic: Map pressure drop after 6500rpm
Replies: 5
Views: 1765

Map pressure drop after 6500rpm

Hi guys, Attached is log file for high compression k20 setup, with stock throttle body and k&n typhon kit (now is changed to injen cai, but log is few months ago). I would like to know, what can be the cause of drop of map pressure? As you can see after 6500 rpm until 8500 rpm ecu is not using 1...
by mladjan
Sun Dec 25, 2016 8:32 am
Forum: Non-Hondata
Topic: Harry's lap timer
Replies: 3
Views: 12656

Re: Harry's lap timer

I would like to know that too. There is a "Custom BTLE OBD" option in harry's laptimer, but not sure which informations to put there to work:
IMG_7342.PNG
by mladjan
Wed Dec 21, 2016 1:04 pm
Forum: Civic Type R 2007-2011 European FN2
Topic: FN2R + TTS Supercharger Supersport Correct map cal
Replies: 7
Views: 4422

Re: FN2R + TTS Supercharger Supersport Correct map cal

Search the forum, somebody attached map for the same setup, so it can be used as "base map".
For getting the best out of this build, it needs to be tuned on dyno.
by mladjan
Wed Dec 21, 2016 11:56 am
Forum: Civic Type R 2007-2011 European FN2
Topic: Launch control activated in normal driving
Replies: 9
Views: 3437

Re: Launch control activated in normal driving

Can be clutch switch be affected with new clutch? Not sure where this switch is located?
by mladjan
Wed Dec 21, 2016 11:02 am
Forum: Civic Type R 2007-2011 European FN2
Topic: Launch control activated in normal driving
Replies: 9
Views: 3437

Launch control activated in normal driving

Hi, I experienced once that launch limiter is activated after track day (probably clutch was under fire still), tomorrow was everything ok. Today I mounted a new clutch and I experienced the same problem. Car doesn't rev more then 6.5k rpm (where launch control is set). What Flashpro use as "sw...
by mladjan
Thu Dec 08, 2016 7:20 am
Forum: K-Pro / KManager
Topic: New injector values
Replies: 3
Views: 2484

Re: New injector values

Thx
by mladjan
Tue Dec 06, 2016 3:05 am
Forum: K-Pro / KManager
Topic: New injector values
Replies: 3
Views: 2484

New injector values

Hi guys, for ep3 N/A high compression build I bought bigger injectors (410cc). They say its oem denso, and straight fit. Disn't got any paper with it with values k-pro needs.
Should I only change value of cc for injector in krpo?
IMG_7130.PNG
IMG_7130.PNG (464.97 KiB) Viewed 2484 times
IMG_7129.PNG
IMG_7129.PNG (1.64 MiB) Viewed 2484 times
by mladjan
Sun Nov 27, 2016 5:56 am
Forum: Civic Type R 2007-2011 European FN2
Topic: Cam angle question
Replies: 9
Views: 9597

Re: Cam angle question

Thx for response! I was looking at hondata videos and I know the process of tuning on dyno, but because renting dyno on few hours is expensive, will do this when I mount a supercharger in next few months. Just wanted to play a little bit with my N/A setup to understand what and why is happening :)
by mladjan
Sun Nov 27, 2016 5:53 am
Forum: K-Pro / KManager
Topic: Ignition tuning and hondata videos
Replies: 0
Views: 1487

Ignition tuning and hondata videos

Hi, I was looking your training videos and they really helped me a lot with a lot of real life experiences (for example, keep the best ignition timing for N/A and subtract 2 angles for boosted because pressure increases a lot on boosted). I have everything clear for fuel and cam angle, but for ignit...
by mladjan
Sun Nov 20, 2016 10:33 am
Forum: Civic Type R 2007-2011 European FN2
Topic: Cam angle question
Replies: 9
Views: 9597

Re: Cam angle question

Here it is :)
dyno run (remap).fpdl
(1019.04 KiB) Downloaded 310 times
by mladjan
Sun Nov 20, 2016 9:21 am
Forum: Civic Type R 2007-2011 European FN2
Topic: Cam angle question
Replies: 9
Views: 9597

Re: Cam angle question

I need to create this log. I have a log for this dyno graph in 5th?
by mladjan
Sat Nov 19, 2016 10:57 am
Forum: Civic Type R 2007-2011 European FN2
Topic: Cam angle question
Replies: 9
Views: 9597

Cam angle question

Hi guys, I have a stock FN2 with groupe N map, with modified fuel table. I was targeting AFR 13:1 on WOT which gave me nice improvement, measured on dyno today. mladjatocakuporedo.bmp Im interested to find out what is the reason of torque drop after 4500rpm, and by looking into map (attached) I can ...
by mladjan
Thu Nov 10, 2016 4:36 pm
Forum: Civic Si 2006-2011 Americas
Topic: Use MAP only above 70kpa
Replies: 7
Views: 5798

Re: Use MAP only above 70kpa

Yes, it is possible! AFM for part throttle for smoother, more comfortable driving and using especially if the engine is naturally aspirated. MAP for WOT for spontaneous, more sporty driving and using especially if the engine is boosted. Especially for supercharged/turbocharged engines and with DBW,...