Search found 146 matches
- Tue May 23, 2017 1:23 pm
- Forum: K-Series Reflash
- Topic: RSX reflash - Is this tuneable via Flash Pro
- Replies: 3
- Views: 8876
Re: RSX reflash - Is this tuneable via Flash Pro
So what you are saying - the reflashed ecu that you can buy -cannot have any further adjustments done by the user with any type of software
- Sun May 21, 2017 11:03 pm
- Forum: K-Series Reflash
- Topic: RSX reflash - Is this tuneable via Flash Pro
- Replies: 3
- Views: 8876
RSX reflash - Is this tuneable via Flash Pro
Hey Hondata,
I am sure this is a very simple answer. The RSX type S Reflash - Is this just one stand-alone new map that hondata sell in a new boxed ECU ? or is this actually user tuneable via Hondata Flash Pro - or any other software package.
Lyle
I am sure this is a very simple answer. The RSX type S Reflash - Is this just one stand-alone new map that hondata sell in a new boxed ECU ? or is this actually user tuneable via Hondata Flash Pro - or any other software package.
Lyle
- Mon May 08, 2017 3:39 pm
- Forum: S300 Calibrations
- Topic: Oem Na H22a - basemap timing at WOT
- Replies: 2
- Views: 1814
Oem Na H22a - basemap timing at WOT
Hey hondata, Just finished a tune on a oem n/a h22a with IHE. Noticed the WOT timing figures were around 30 degrees - though this was a little on the high side and pulled it back to around 25 for piece of mind. Is this amount of timing really necessary - and are these values really what the engine r...
- Mon Mar 20, 2017 5:10 pm
- Forum: s300 / SManager
- Topic: P28 S300 - ECU voltage detection problem
- Replies: 3
- Views: 1509
Re: P28 S300 - ECU voltage detection problem
Voltage going into the ECU is as expected. 13.5v or there abouts.
- Sat Mar 18, 2017 7:22 pm
- Forum: s300 / SManager
- Topic: P28 S300 - ECU voltage detection problem
- Replies: 3
- Views: 1509
P28 S300 - ECU voltage detection problem
Hey Hondata, Currently have P28 S300 on a B18C Turbo Integra Dc2. Currently the ECU will not see the correct amount of voltage being produced from the battery. The floating battery voltage is around 13v as you would expected however the ECU sees this as 6.0v - and hense is messing with the injector ...
- Tue Jan 17, 2017 8:24 pm
- Forum: s300 / SManager
- Topic: SManager software requests
- Replies: 336
- Views: 1515804
Re: SManager software requests
Hondata is this a possibility ?Lyle_57IAL wrote:Hey Hondata,
In regards to the flex fuel - could I request a boost solenoid trim for the flex fuel sensor ? So you can setup more
Boost for when running e85
Hondata is this possible ?
- Fri Dec 30, 2016 8:58 am
- Forum: s300 / SManager
- Topic: Engine Idle B18C2 - AC Compressor & Radiator Fans
- Replies: 1
- Views: 1335
Engine Idle B18C2 - AC Compressor & Radiator Fans
Hello Hondata, Currently having difficulty setting a smooth engine idle on a B18C2 GSR Turbo with AC still retained and full size radiator. When idleing - when the AC turns on the car will drop in rpm by approximately 200rpm and lean out from around 14.5 to 16.5. Obviously from the extra load on the...
- Fri Dec 30, 2016 8:55 am
- Forum: S300 Calibrations
- Topic: B18C GSR Turbo - Base map Review
- Replies: 1
- Views: 3272
B18C GSR Turbo - Base map Review
Hey Hondata, Would you mind reviewing this base map for engine Run in? Currently 6 psi boost cut, vtec disabled, low speed maps only tuned. Would you mind specifically checking the low speed ignition timing tables to see if these are reasonable for a run in tune. There was no detonation on the tune ...
- Thu Dec 29, 2016 10:49 pm
- Forum: s300 / SManager
- Topic: B18c over heat protection
- Replies: 1
- Views: 1118
B18c over heat protection
Hey hondata, Currently working on a B18c Honda integra turbo that has both a front mounted intercooler, and aircon condenser core in front of the oem full size radiator. Because of this the temps get a little warmer then usual when hitting low road speeds. What is a recommended over temperature prot...
- Tue Sep 27, 2016 4:34 am
- Forum: FlashPro Manager
- Topic: Flash Pro Boost Control - PWM
- Replies: 3
- Views: 1551
Re: Flash Pro Boost Control - PWM
My specific use is a accord euro.
However are you saying that based on different base maps created for different cars capable of supporting flash pro - different features will be available?
Cheers
However are you saying that based on different base maps created for different cars capable of supporting flash pro - different features will be available?
Cheers
- Mon Sep 26, 2016 2:18 am
- Forum: s300 / SManager
- Topic: Vtec Spool CEL - B18c P28
- Replies: 7
- Views: 2801
Re: Vtec Spool CEL - B18c P28
If it is giving strange errors and behavior, something is not right. If it were me I would not use that ECU and use one that worked correctly to avoid any future problems. Spunkster - This is not a quality response that of what i would expect from a vendor / manufacture. What is the condition that ...
- Sun Sep 25, 2016 6:26 am
- Forum: FlashPro Manager
- Topic: Flash Pro Boost Control - PWM
- Replies: 3
- Views: 1551
Flash Pro Boost Control - PWM
Hey Hondata, I am still trying to understand if the Flash pro is Boost control capable? In the help contents it seems to be referenced ? but i cannot find the solenoid duty cycle / quick spool / high low settings in my flash pro manager? Or do these only become available on only specific make/model ...
- Fri Sep 23, 2016 8:13 pm
- Forum: s300 / SManager
- Topic: Vtec Spool CEL - B18c P28
- Replies: 7
- Views: 2801
Re: Vtec Spool CEL - B18c P28
Why Does hondata give the option available to disable the error in the Vtec Tab ?
- Fri Sep 23, 2016 7:23 am
- Forum: FlashPro Manager
- Topic: Flash Pro - Flex Fuel Input
- Replies: 1
- Views: 1633
Flash Pro - Flex Fuel Input
Hey Guys,
Currently looking at a 2004 honda Accord K24 using flash pro. These ECUs do they natively support the frequency Flex fuel input from the standard 3 wire GM sensor ? if not is it an option to use a 0 - 5v signal from a ethanol gauge (Innovate etc)
Thanks hondata :)
Lyle
Currently looking at a 2004 honda Accord K24 using flash pro. These ECUs do they natively support the frequency Flex fuel input from the standard 3 wire GM sensor ? if not is it an option to use a 0 - 5v signal from a ethanol gauge (Innovate etc)
Thanks hondata :)
Lyle
- Fri Sep 23, 2016 12:41 am
- Forum: s300 / SManager
- Topic: Vtec Spool CEL - B18c P28
- Replies: 7
- Views: 2801
Re: Vtec Spool CEL - B18c P28
Spunkster - i would like to know if this will potentially cause any harm to OR allow a harmful condition to occur by disabling the vtec spool CEL
Cheers
Cheers