Hondata

Just an update, I installed the SpeedFactory 3 Bar Map Sensor along with my 255 Walboro.

Car started great, just had to add a small bit of fuel overall. Haven't drove on it yet but everything seems great in regards to AFR's & how it starts & idles.

Thank you!

I just wanted to make sure.

Will respond back with results. I just installed my Walboro 255.

Hey guys, I have a SpeedFactory 3 Bar Map Sensor that I am installing. When I go into Smanager, does it matter which brand of "3 Bar" that I choose? I see Motec, Neetronics, & MSD. No SpeedFactory, so which do I pick? The reason I ask is because on the SpeedFactory Data Sheet from thei...

Here is another pull I made today. About 13 degrees at 50% throttle (stock injectors) 4562RPM 6.8lbs 99% duty cycle lol. Felt really clean & I did not see any smoke or smell anything burning lol. Suggestions open please! Trying to get a grip of a conservative tune before I throw on my RC 750 &am...

Hey guys, I just got my setup back together. F22b non Vtec. Just made the first pull. I have timing pretty low under boost, so I am just looking for feedback in regards to timing. Tuning to 7lbs for now. I know that these ringlands are very weak but I have read if you have the timing under boost acc...

Thank you for that confirmation!

Good afternoon all,

For creat boost tables, if you set it how you want & then go to your map..if you select to only show N/A tables only (to make adjustments) does the creat boost tables forget/erase the setting changes you made in regards to retarding timing per PSI?

Sorry wayyy late.

Yes, still need it?

The H22 maps that come on the basemap file is not gonna work too well for you. Look around on here for some stock H22 calibrations & upload. MAKE SURE YOU HAVE A WIDEBAND. Just pull or add fuel where needed. Hook your wideband to the ECU so your computer will see exactly what your wideband is re...

Never followed up on this..it was the aftermarket distributor I was using causing the issue.

Got a Honda H22 Distributor & all is well now.

Thanks guys!!

I am glad I am not the only one.

I had a similar issue happen while tuning my friend's B18c. Anytime I made a change on the map it didn't matter because it would constantly say 11.0 on the Wideband. I just restarted the car a few times & tried uploading the same map again. Idk if it was a random glitch but it ended up going awa...

Hey guys if you want to, I have my map from last month uploaded onto another post that I made if you want to download that one..it works really great for my setup. The title to the post is: "RPMs & Duty Cycle Lines on Graph Wavy in VTEC" I uploaded a pull & my map is there as well!!

Crap my bad guys, I totally forgot to follow up on this.

I have a good map for you guys if you still need it.

I am at work but I will write myself a reminder to upload it tonight.

Sorry guys!!