Hondata

Uploaded it today and it seems to work more or less as stock, as it should :)

Sorry for the off topic here but nice writeup on the S300 install on your site

Same goes for the P30 I guess?

As stated in the topic. - Will the S300 work equally good with either ECU - P28 and P30? I have a P30 but everyone seems to be using the P28 (?) - Will a somewhat mechanically inclined person (me, in this case) be able to re-solder and do all the necessary stuff to an ECU to install the S300? Or is ...

I bought my AEM UEGO Gauge 2 weeks ago, does that mean I'm in the clear? As far as I can see in the datasheet it seems that the AEM delivers a voltage of 3.38V at 16.75 AFR(analog output/white wire) - another clue that this is going to work just fine or what? Sorry if I'm being a dumbass but what I ...

This theme seems to be a never ending story but things change so here is the new version:

Will the all new S300 have problems with the AEM UEGO Gauge model(#30-4111)? (0-5V output from the AEM and so on...)

That seems to be - 21 - , which is "Spool Solenoid Valve"

So, to sum it up: ( - Required= more or less :P ) - Required: S200 (obviously) - datalogging/3-step rev limiter incl. - Required: Socketed ECU + EPROM - Required: Rom Editor for tuning and editing maps yourself - Required: Rom Emulator (romulator) for time saving and in-car tuning. - Required: Eprom...

Thanks for the answers!

Now, if I have my S200 in my car 24/7 - do I still have to program the eprom and put it in my ECU? I mean, if I have my own S200 - aren't the maps stored in the S200 and therefore no need for an eprom and programmer and so on?

Vehicle : 1992 EUDM Civic VTi 3-door Engine : B16A2 (no swap, it is oem :P ) ECU : P30-G <---- OBD : OBD1 (the grey plugs) Now, ShopX will sell me Hondata S200 with a basemap written upon the info I give them on my current setup. 1. If I want to run my engine with this basemap, I only need the S200...