Search found 79 matches

by Carchitect
Wed Apr 16, 2003 8:43 pm
Forum: Applications
Topic: New Wideband Oxygen Sensor Controller
Replies: 3
Views: 3742

Motec PLM has a combined controller and display unit. It has a serial cable output for the laptop/desktop and can use the software to change the output voltage in analog and digital control (which is used in the Motec M4/M48/M800+ systems and ADL). The Motec is the only wideband O2 controller to be ...
by Carchitect
Wed Mar 26, 2003 9:49 pm
Forum: Applications
Topic: Is there any hope?? Newbie question..
Replies: 3
Views: 3097

Not to rain on the parade, guys, but you would have better hopes if you were to have a C32/C30 NSX instead.

Joe.
by Carchitect
Wed Mar 26, 2003 9:44 pm
Forum: Applications
Topic: Hondata for S2000
Replies: 2
Views: 3041

I would seriously only recommend staying with the honda ecu until Hondata were to come out with a standalone system for it. The S2000 Ecu uses an immobilizer system which you would loose with an A/M ecu and increase the likley hood of theft. The ecu is also OBD-2 compliant and hondata is trying to w...
by Carchitect
Sun Feb 09, 2003 10:45 pm
Forum: Non-Hondata
Topic: TPS wires
Replies: 3
Views: 3005

The ecu sensor ground is the green/white wire. yes there will be a change in voltage from the vehicle ground to this wire. you will need to adjust the voltage with the volt meter across two of the three wires ( I can't remember of the top of my head) instead of ground.

Joe.
by Carchitect
Sun Feb 09, 2003 10:30 pm
Forum: Non-Hondata
Topic: Knock sensor bypass???
Replies: 1
Views: 2489

You probably need to get your 91 si ecu redone thru zdyne. As much as I don't like their product. Zdyne seems to be able to play with the OBD0 ecus a lot more than hondata. However, I would recommend you change the vehicle over to OBD-1 instead. However, it won't be very economical the vehicle will ...
by Carchitect
Sun Feb 09, 2003 10:22 pm
Forum: Applications
Topic: ECU??????
Replies: 2
Views: 2884

This ecu can be changed to an automatic ecu.

Joe.
by Carchitect
Sun Feb 09, 2003 10:21 pm
Forum: Applications
Topic: Automatic or Manual ECU??
Replies: 2
Views: 2827

Automatic JDM DC2 w/ a B18C engine. This ecu cannot be used in conjunction with Hondata. In fact no one can chip this one.

Joe.
by Carchitect
Sun Feb 09, 2003 10:07 pm
Forum: Applications
Topic: 01 ITR and s200 Q
Replies: 2
Views: 2788

The components you have selected would work just fine. However, since the inndividual throttle body conversions utilize an exceptionally leagr plenum they will have the opportunity to flow a lot better than a barrel style plunum. Due to this I would suggest you go with at least 330cc/min injectors i...
by Carchitect
Sun Feb 09, 2003 10:01 pm
Forum: Applications
Topic: S200 purchased prior to S100 release, 3step rev limiter...
Replies: 6
Views: 4937

The three step rev limiter makes the ecu go from Dr.jeckyl to Mr. Hyde!. Yes the upgrade can be done but you will need to send in the hondata box to hondata. Your vehicle will run with the CEL on and a maximum rev at 4000rpm until the box is returned.

Joe
by Carchitect
Sun Feb 09, 2003 9:53 pm
Forum: Applications
Topic: Need information about tuned turbo H22a's..........
Replies: 3
Views: 3236

To those of us who are dealers or have a stage 4 system have access to the hondata library thru the web site we can download the program you are trying to get. However, all dealers and tuners will prefer to install a wideband O2 sensor and tune the fuel tables to your vehicle and dyno tune it to tun...
by Carchitect
Sun Feb 09, 2003 9:43 pm
Forum: Applications
Topic: turbo F22
Replies: 1
Views: 2376

If you are going to turbocharge your F22 the auto wil not hold anyways. You can't even increase the line pressure to the tranny unless you open it up. I would suggest you replace the auto w/ a 5 sp w/a clutch and LSD diff along with the hondata and turbo install.

Joe
by Carchitect
Sun Feb 09, 2003 9:37 pm
Forum: Applications
Topic: Which ECU is best for Euro R H22A(JDM)
Replies: 4
Views: 5370

The P72 will work great. As long as you install the hondata system as well.

Any P72/P61/P30 will be the ecu of choice since they do have knock control. Any other ecus do not have this feature but will also cost you a lot cheaper.
by Carchitect
Sat Feb 08, 2003 10:08 pm
Forum: Applications
Topic: 01 prelude sh obdII P5P ecu
Replies: 9
Views: 7369

The prelude ATTS is a system that involves digital communication of the ecu and the atts unit. The system was designed to allow improved vehicle by utilising sun gears within the atts differential to allow for gear gearing the wheel on the outside of the turn to spin faster than the inside if the tu...
by Carchitect
Sat Feb 08, 2003 9:49 pm
Forum: Applications
Topic: i am a virgin pls help!!
Replies: 2
Views: 2604

Send in your 93 dx ecu to hondata to have a vtec upgrade done to it. It will now perform as a P28 ecu. This along with any hondata stage 2/3/4 or S100/S200 will work the JDM B16A w/o any problems.

Joe
by Carchitect
Sat Feb 08, 2003 9:46 pm
Forum: Applications
Topic: S100 - base maps
Replies: 1
Views: 2246

The system will come w/a tester map w/in the chip. You will need to talk to your dealer to have a map installed onto the chip.