Hondata

The FK8 is different from the FL5. Adding it for the FL5 took hundreds of development hours, and it will take at least as long to develop for the FK8.

Tablets often run a different version of windows, even if windows has the same name, and they don't support our software.

In most cases the CARB tune and race tunes are identical except where we have to tune fuel for the peculiarities of the intake. In theory if an intake is CARB approved then it does not alter the air flow readings and thus requires no tuning. In practice that is seldom the case. Also for many vehicle...

AF and trims are not right. 16:1 under boost will misfire. Large positive fuel trims. A lot of variation in the lambda readings. We can diagnose further from the datalogs because many, many error codes have been disabled. So if there is a problem there is no way of knowing that. You cannot disable e...

The actually tune is not datalogged - the behavior you are seeing is a display bug tracing the boost by gear table which we will fix.

Live tuning should be switched off when not used. Your turbo is lazy or there is a boost leak.

Honda relays should be 120 ohm coil resistance. So more than 100 mA I guess but not by much.

Unknown. 100 mA is a lot for a relay by itself.

4.2.1 (11 Jan 2024) Firmware updated to version 236 Fixed live tuning table memory size calculation [2019+ RDX] Added support for US 2023 model 5YF-AL2 Download here Please only reply to this thread with issues & questions specific to the changes in this release. For all other problems start a n...

Yes, for a diode protected relay 85 and 86 should be switched.

SManager V2.8.5 (5 Jan 2024) [S300 V3] Firmware version 21 Fixed analog input values with conversions Fixed datalog with analog inputs downloading as double length Fixed datalog export Download here Please only reply to this thread with issues & questions specific to the changes in this release....

Works ok.

I checked the S300 CAN output and it looks ok. We're doing a release later today but it should not affect anything.

Thanks for the update - glad it is running, and it is always good to hear what the solution was.

100 Hz output with 8 packets = 80 ms per packet type

Post a datalog and your calibration.