Search found 65 matches
- Thu Sep 28, 2017 7:17 pm
- Forum: s300 / SManager
- Topic: Differences between datalog session and record session?
- Replies: 12
- Views: 4033
Re: Differences between datalog session and record session?
Certainly, which settings do you need? the calibration or the smanager.ini ? What I do when i am ready to datalog/record is even close the sManager, open it again, load the map and then press F9, that does start the datalog and the record at the same time, once I am done what i do is press F10, whic...
- Wed Sep 27, 2017 3:03 pm
- Forum: s300 / SManager
- Topic: Differences between datalog session and record session?
- Replies: 12
- Views: 4033
Re: Differences between datalog session and record session?
I have upgraded to the latest version v2.6.1 and did the same thing, started to trace and record at the very same time (by pressing F9 directly, so it starts both the datalog and the recording) and went for a drive, then come to a full stop and shutdown the car from the key, so both the datalog and ...
- Fri Sep 22, 2017 10:27 am
- Forum: s300 / SManager
- Topic: SManager software requests
- Replies: 336
- Views: 1806798
Re: SManager software requests
A feature to remove traces with less than X samples in the fuel/ignition maps would be nice. So for instance I can run a datalog/trace for a few minutes and remove all traces/cells that have collected less than 10 samples This way you do not need to highlight each individual cell on the map to see i...
- Tue Sep 19, 2017 10:51 am
- Forum: s300 / SManager
- Topic: Differences between datalog session and record session?
- Replies: 12
- Views: 4033
Re: Differences between datalog session and record session?
Cool! Glad you guys were able to fix it.
So the values read/displayed when loading the recorded session were invalid? or the ones showing when live data-logging?
So I know which one I can trust in the mean time
Again, thanks for fixing and keep up the good work! :)
So the values read/displayed when loading the recorded session were invalid? or the ones showing when live data-logging?
So I know which one I can trust in the mean time
Again, thanks for fixing and keep up the good work! :)
- Mon Sep 18, 2017 10:38 am
- Forum: s300 / SManager
- Topic: Differences between datalog session and record session?
- Replies: 12
- Views: 4033
Re: Differences between datalog session and record session?
Any update on this?
- Mon Sep 18, 2017 10:36 am
- Forum: s300 / SManager
- Topic: Question regarding map column values
- Replies: 6
- Views: 1774
Re: Question regarding map column values
Fair enough, thanks for the help.
- Thu Sep 14, 2017 9:21 pm
- Forum: s300 / SManager
- Topic: Question regarding map column values
- Replies: 6
- Views: 1774
Re: Question regarding map column values
Ah. I see. That does clarify a lot. Thanks for the explanation. Dumb question tho. But wouldn't it be a good idea to use the 3 extra columns of the boost table and modify their load index then as well ? To have something like 900/940/980 and 1020/1040/1060+ on the boost tables despite I am N/A ? I a...
- Thu Sep 14, 2017 3:25 pm
- Forum: s300 / SManager
- Topic: Question regarding map column values
- Replies: 6
- Views: 1774
Re: Question regarding map column values
Ok, thank you very much for your reply, that does make sense. Except for the part that the ecu would freak out :) I was targeting the col9 and 10 to 12.8/.9 AFR and i will try to aim col8 to 13.5/.6 and make it as smooth as possible. but in my case I found that there is always a big jump for the WOT...
- Wed Sep 13, 2017 4:46 pm
- Forum: s300 / SManager
- Topic: Question regarding map column values
- Replies: 6
- Views: 1774
Question regarding map column values
Excuse me if this is a dumb question but would like to read some opinion on this as I haven't found much on this topic on the forum. I am curious to know how are you suppose to tune the columns on the fuel map, As I am having the problem that, the base map jdm-p30 I started to use has a col10 Load I...
- Fri Sep 08, 2017 2:09 pm
- Forum: s300 / SManager
- Topic: Differences between datalog session and record session?
- Replies: 12
- Views: 4033
Re: Differences between datalog session and record session?
Here is another example I just did to test Opened sManager Loaded my calibration Pressed F9 to start Datalog and Record Drove for about 20minutes Stopped Datalog and Record at the same time (datalog only was NOT running without recording) Captured screenshot of the overlay change Closed Datalog, and...
- Fri Sep 08, 2017 1:09 pm
- Forum: SManager Display Templates
- Topic: Bug in Bar Graph?
- Replies: 4
- Views: 11224
Re: Bug in Bar Graph?
Sorry for the delay, i totally missed this reply. I checked again, and no, it doesnt work I Load my display (attached) Edit the properties of the Bar Graph and set the Pointer Size to 10 The Pointer Size DOES change to 10 as expected Save the Display and Reload The Pointer Size is back to 15 Please ...
- Fri Sep 08, 2017 12:58 pm
- Forum: s300 / SManager
- Topic: Differences between datalog session and record session?
- Replies: 12
- Views: 4033
Re: Differences between datalog session and record session?
This is a p28 ECU running s300 v3, Honda Civic B16a2 car/engine with a PLX Wideband connected to D14 The calibration and datalog "I belive" is not dependant as i can reproduce this error at any time, it has been like that always for me, so thats why I ended up asking. I am using both the s...
- Fri Sep 08, 2017 9:34 am
- Forum: s300 / SManager
- Topic: Differences between datalog session and record session?
- Replies: 12
- Views: 4033
Differences between datalog session and record session?
I am seeing some behavior that is driving me crazy and I want some comments about it Whenever I start datalogging as well Start Recording the fuel map overlay is not the same as when I later LOAD the recorder datalogging? What I mean is, I Start the datalog and the recording process, the fuel map th...
- Tue Aug 29, 2017 1:45 pm
- Forum: S300 Calibrations
- Topic: Suggestions for B16a2 Basemap
- Replies: 6
- Views: 7162
Re: Suggestions for B16a2 Basemap
After much delays I finally got hands into this, and have to tell the first impressions are that the jdm-p30 basemap is wayyy to rich, I had to reduce a 5% overall on the whole map and then start to work from there but I already ended up moving some cells way below 15-20% and i believe i am creating...
- Tue Feb 21, 2017 6:34 pm
- Forum: SManager Display Templates
- Topic: Bug in Bar Graph?
- Replies: 4
- Views: 11224
Bug in Bar Graph?
Is it just me, or the Pointer Size property of the Bar Graph doesnt get saved on the Display? I keep setting it to 8 or 10 and when Save and Load it gets reset to default 15 Also a quick view on the save file showed that the property is not stored on the file, so makes sense its not restored. Is thi...