Hondata

The battery voltage is fluctuating constantly and it should be more steady.

The short term trims are going wild when this is happening as well.

Post a picture of the P06 showing the inside of the ECU.

The other ECU's are not compatible with the s300.

Post the calibration as well as a datalog showing when this is happening.

What is your FlashPro serial number?

With everything plugged in and the ignition in the on position, go to the Help menu and click on “send feedback”. Include a detailed description of the issue.

Try raising the torque limit to max.

Some areas were not actually at WOT as the throttle was not fully depressed.

What is the part number of the ECU you are using with the s300?

You may need to have the AC system tested to make sure that it has the correct pressure to operate.

Have you tried uploading again?

What is the K-Pro serial number?

That version of software is over a year old and you should use the most recent version of software.

Could have been moisture, but really impossible to say for sure.

It sounds like the ECU may not be powering up as it should. Have the capacitors been replaced on the ECU?

What are the lights doing on the s300 board when the ignition is turned on?

I'm sorry, but it is out of warranty. We do not offer failure analysis for parts like this.

Is the sensor mounted on the top of the throttle body?

I'm sorry, but automatic vehicles are not supported.