Search found 212 matches

by hpmx18
Mon Dec 15, 2014 8:03 am
Forum: S300 Calibrations
Topic: B18c4/B18c1 block B16 head Turbo Basemap
Replies: 2
Views: 2972

Re: B18c4/B18c1 block B16 head Turbo Basemap

use the preloaded map and adjust afr on idle and map and should b good from there
by hpmx18
Thu Dec 04, 2014 3:44 pm
Forum: S300 Calibrations
Topic: need a good basemap please help
Replies: 2
Views: 1990

Re: need a good basemap please help

post the startup file that you are using
by hpmx18
Thu Dec 04, 2014 3:40 pm
Forum: S300 Calibrations
Topic: Could use some assistance please..
Replies: 3
Views: 1746

Re: Could use some assistance please..

what i have seen b4 on the dyno depending on the turbo if the setup is laggy you will not build alot of boost in low gears like 1st n 2nd boost wont actuallly hit the way you want unless high mph or engine load like 3rd - 4th you can adjust the duty cycle in those low rpm to help boost quicker but m...
by hpmx18
Fri Nov 21, 2014 9:22 pm
Forum: S300 Calibrations
Topic: Could use some assistance please..
Replies: 3
Views: 1746

Re: Could use some assistance please..

best to test it on a dyno testing it on the road is very dangerous
by hpmx18
Tue Nov 04, 2014 12:06 pm
Forum: S300 Calibrations
Topic: Help me please. I need basemap B18C red top spec98 200 hp
Replies: 2
Views: 2138

Re: Help me please. I need basemap B18C red top spec98 200 h

Sergti wrote:I need a basemap for my engineswap. Im getting the B18C-R JDM.
load the itr map and adjust idle and at 8% to entire low cam fuel map and head to your tuner and get dyno tune
by hpmx18
Mon Oct 27, 2014 7:52 am
Forum: S300 Calibrations
Topic: D16
Replies: 4
Views: 5885

Re: D16

gnxpro24 wrote:I need a basemap for a stock d16y8 Hondata s300. Anyone?
use the d16a1 and make changes till your able to idle the car and go from where if you have a wideband
by hpmx18
Mon Sep 22, 2014 3:03 pm
Forum: s300 / SManager
Topic: s300 issue confused
Replies: 4
Views: 2142

Re: s300 issue confused

Spunkster wrote:Send an email to support <at> hondata.com with the following and I will issue an RMA and give you further
instructions (include a link to this thread):

Name:
Address:
Phone:
Email:
Serial#:
Description of Problem:

cool appreciate it
by hpmx18
Mon Sep 22, 2014 2:08 pm
Forum: s300 / SManager
Topic: s300 issue confused
Replies: 4
Views: 2142

Re: s300 issue confused

Go to the online menu and try to erase the ECU. When that finishes, close the program and then reopen it and go to New Calibration. load one of the base calibrations and then upload to the ECU and see if that resolves the issue. that was 1 of the first things that i did and just did it 1 last time ...
by hpmx18
Mon Sep 22, 2014 1:48 pm
Forum: s300 / SManager
Topic: s300 issue confused
Replies: 4
Views: 2142

s300 issue confused

serial number 8160 software version 2.3.3.0 not able to data log to provide attachment ecu is a P06 honda civic 1998 b18b bone stock no bolt-ons while the ecu is plugged in, solid red cell from board, also when attempting to datalog no data is displayed and car is missing or on 3cylinders i tried ge...
by hpmx18
Fri Aug 08, 2014 5:31 pm
Forum: S300 Calibrations
Topic: Needing Basemap for 84mm Fully Built B18C1 with JUN3 CAM
Replies: 2
Views: 1647

Re: Needing Basemap for 84mm Fully Built B18C1 with JUN3 CAM

you can start with ITR base and adjust fuel map accordingly till your able to get a steady afr on idle and should be able to tune immediately
by hpmx18
Mon Aug 04, 2014 6:01 pm
Forum: S300 Calibrations
Topic: B16 SKUNK2 PRO3 CAMSHAFTS
Replies: 1
Views: 1616

Re: B16 SKUNK2 PRO3 CAMSHAFTS

pro 3 cams require minimum 13+ compress as quoted by skunk2
by hpmx18
Mon Aug 04, 2014 6:00 pm
Forum: S300 Calibrations
Topic: In need of a tune for a B18B; running lean under boost
Replies: 2
Views: 1631

Re: In need of a tune for a B18B; running lean under boost

click edit from top menu
click create boost tables

on retard ignition put 1.00
on add fuel under boost put 200%

and you should see fuel under boost gets richer if its too rich (-) that % if too lean (+) to that number
by hpmx18
Mon Aug 04, 2014 5:57 pm
Forum: S300 Calibrations
Topic: Need n/a h22a4 basemap
Replies: 1
Views: 1830

Re: Need n/a h22a4 basemap

load the preloaded map and adjust individual columns till it idle and rev's smoother and go tune
by hpmx18
Fri May 02, 2014 3:13 pm
Forum: S300 Calibrations
Topic: b20z basemap
Replies: 1
Views: 1885

Re: b20z basemap

use the b20vtec map i posted couple months back and just turn off vtec and you should b good till you get the car on a dyno to finetune rest of tune
by hpmx18
Thu Oct 24, 2013 10:25 pm
Forum: S300 Calibrations
Topic: B16A map with I/H/E needed
Replies: 9
Views: 5279

Re: B16A map with I/H/E needed

if you have a wideband you can make your own buy adding & subtracting not every map will run same on every other car