Search found 249 matches

by Luke
Tue Jan 22, 2013 9:29 am
Forum: s300 / SManager
Topic: Mtx-L innovate
Replies: 6
Views: 4184

Re: Mtx-L innovate

use a proper ground for the MTX-L and wire it good. if there are some differences, you can manage it with the offset voltage.

and check if the MTX-L is programmed right.
by Luke
Mon Jan 14, 2013 2:32 am
Forum: s300 / SManager
Topic: Oem fuel injectors to larger injectors lean issue
Replies: 7
Views: 2621

Re: Oem fuel injectors to bigger injectors issue

set your fuel pressure to the pressure the injectors need.

if your stock injectors were driven with a higher pressure, recalculate the exact pressure needed now.

best regards Lukas
by Luke
Sun Jan 13, 2013 1:55 am
Forum: s300 / SManager
Topic: SManager software requests
Replies: 308
Views: 109994

Re: SManager software requests

and another shot from me: :D just took a look at the info of the new version, where it says, that now the MAP sensor can read, when the engine is off. with that option this should give a possibility to get rid of the pressure sensor in the ECU and add a (optional) compensation for the air pressure. ...
by Luke
Sun Jan 06, 2013 8:05 am
Forum: s300 / SManager
Topic: wideband best hookup
Replies: 1
Views: 1081

Re: wideband best hookup

on the S300v2 the analog inputs are only for datalogging.

so you have to use another input, when you want to use your wideband for closed loop

best regards Lukas
by Luke
Fri Dec 28, 2012 10:10 am
Forum: s300 / SManager
Topic: Math channels datalogging
Replies: 1
Views: 934

Re: Math channels datalogging

as mentioned in the other thread: would like to see that as well (STREETDYNO IN SMANAGER would be possible!)
by Luke
Fri Dec 28, 2012 2:41 am
Forum: s300 / SManager
Topic: S300 with Autometer wideband input. Has anyone done it?
Replies: 12
Views: 4693

Re: S300 with Autometer wideband input. Has anyone done it?

You set your voltage/lambada conversion in hondata. The offset settings for e85 is 0v=6.6afr 5v=13.2afr. For gas 0v=10afr 5v=20afr. 2.35v is stoich for both gas and afr. in that case your wideband will read different values on the gauge and in the smanager. that should work ok, but can be a problem...
by Luke
Wed Dec 26, 2012 9:27 am
Forum: s300 / SManager
Topic: Autotune
Replies: 7
Views: 2292

Re: Autotune

hi, we're sitting in the same boat. i'm unsing the LM2 by innovate with a jumper-harness. everything nicely soldered and put in some XLR connectors ;) (these are normally used for sound and lightning for public auditions etc.) and also using D14 the last thing, why i don't get the offset to 0 is, th...
by Luke
Wed Dec 26, 2012 8:37 am
Forum: s300 / SManager
Topic: Autotune
Replies: 7
Views: 2292

Re: Autotune

thanks, shiroitenshi! that was, what i was looking for and what i want to do. if often tune with a friend of mine do that "autotune" job by ourselfs. in some cases there isn't the possibility to tune with 2 people, so the part-throttle maps could be written pretty fast and then edited. so: when driv...
by Luke
Wed Dec 26, 2012 6:51 am
Forum: s300 / SManager
Topic: fic 1150cc dead setting??
Replies: 3
Views: 1262

Re: fic 1150cc dead setting??

your seller should have provided you a data sheet with the exact dead times. lwatkinson's work will do it's job, but after i have read it, it seems quite complicated and take quite a long time. contact your seller or the producer of your injectors, if they can provide you the exact numbers. best reg...
by Luke
Tue Dec 25, 2012 3:57 pm
Forum: S2000 2006-2009 Americas/Europe/Asia
Topic: dec'05 s2k with 06 ECU - will that work?
Replies: 1
Views: 1662

dec'05 s2k with 06 ECU - will that work?

a friend of mine has a s2000 built in december 2005.

the ECU should be PZX-A06, what I remember.

would it be possible to equip that car with a PZX-07 (or other) ECU, that it works with the flashpro? would be great if i could get an answer.

best regards Lukas
by Luke
Tue Dec 25, 2012 2:19 am
Forum: s300 / SManager
Topic: Autotune
Replies: 7
Views: 2292

Re: Autotune

lwatkinson wrote:You can activate it when ever you want. it will adjust the fuel according to the calibration file.
have you read, what i have wrote?

what it does is clear. but how to activate? that is, what i haven't figured out.


best regards Lukas
by Luke
Mon Dec 24, 2012 4:12 am
Forum: s300 / SManager
Topic: Autotune
Replies: 7
Views: 2292

Autotune

i know, that in the options menu there is such a option, but how does that really work?

i have never figured out, when the autotune is activated or where it can be activated.

can someone please explain that?

best regards Lukas
by Luke
Fri Dec 21, 2012 11:42 am
Forum: s300 / SManager
Topic: S300 with Autometer wideband input. Has anyone done it?
Replies: 12
Views: 4693

Re: S300 with Autometer wideband input. Has anyone done it?

as far as i have learnd it in university it says, that lamdba 1 is stoich. that means, that for 1kg of fuel is a certain amount of air needed, to get burned fully. for petrol this amount of air is 14.7kg. for E85 it is 9.8kg. so: stoich is the same, indeed. but the bases are different. when you put ...
by Luke
Wed Dec 19, 2012 12:03 pm
Forum: s300 / SManager
Topic: ITB - Atmospheric pressure compensation
Replies: 8
Views: 2261

Re: ITB - Atmospheric pressure compensation

ahh, I see.

as I said: i'm not the biggest ITB expert, so that was just an idea, which could work, but doesn't as expected.

never mind.

best regards Lukas
by Luke
Wed Dec 19, 2012 6:09 am
Forum: s300 / SManager
Topic: Some one who knows boosted Cars please help me!!!
Replies: 3
Views: 1422

Re: Some one who knows boosted Cars please help me!!!

white smoke is a sign of burned water. so you head gasket might be gone. if you have water in the combustion chamber, it could damage your engine. maybe your engine is damage on one or more cylinders and isn't able to rev anymore. "bubb bubb bubb" could be a sign of losing compression somewhere. get...