Search found 16 matches
- Thu Sep 18, 2014 1:23 pm
- Forum: s300 / SManager
- Topic: Service Connector Switch
- Replies: 2
- Views: 1984
Re: Service Connector Switch
IT has to do with how the light is wired. Unless you remove the bulb it will always come on when the SCS is grounded. In SManager, the MIL sensor also turns ON when SCS is grounded. If the CEL light wiring was somehow independent from S300, it would light up with MIL OFF, but it only lights up when...
- Sat Sep 13, 2014 3:27 am
- Forum: s300 / SManager
- Topic: Service Connector Switch
- Replies: 2
- Views: 1984
Service Connector Switch
Hi all, I've made a post regarding this issue a few days ago, but I cannot find it anymore, so I'm posting again... If it got deleted by admin, please don't do it again without letting me know why. So, my question it's how to properly connect a SCS to S300. I have a Honda Integra Type-R 1998 with tu...
- Wed Oct 10, 2012 3:09 pm
- Forum: s300 / SManager
- Topic: Program to change RPM and Load indexes from S300 calibration
- Replies: 16
- Views: 10565
Re: Program to change RPM and Load indexes from S300 calibra
In post #1 there's a new link to version 1.1a of S300Calculator. Previous versions of SManager had a bug that caused the display of incorrect MAP values when the scale was in PSI. I had to introduce the same bug in S300Calculator so the MAP values in PSI will match SManager when presented in S300Cal...
- Sat Mar 17, 2012 4:06 am
- Forum: s300 / SManager
- Topic: Program to change RPM and Load indexes from S300 calibration
- Replies: 16
- Views: 10565
Re: Program to change RPM and Load indexes from S300 calibra
how about a program to compare the rest if the tables, cranking, ECTc etc? Hi Johnny_9, such function it's out of my scope of interest, so I'm not really into it, but since calibration files (skl) are text files, I think you might be able to get that with some file comparing tool, there are loads o...
- Fri Jan 13, 2012 5:37 am
- Forum: s300 / SManager
- Topic: Program to change RPM and Load indexes from S300 calibration
- Replies: 16
- Views: 10565
Re: Program to change RPM and Load indexes from S300 calibra
This error does not occur on my system, but I made a few changes to protect it.
The link in post#1 has been updated with a new version (v1.1). Try it! No need to rerun setup.
The link in post#1 has been updated with a new version (v1.1). Try it! No need to rerun setup.
- Thu Jan 12, 2012 12:50 pm
- Forum: s300 / SManager
- Topic: Program to change RPM and Load indexes from S300 calibration
- Replies: 16
- Views: 10565
Re: Program to change RPM and Load indexes from S300 calibra
run time error 380. This is a 50% chance the setup didn't run properly due to lack of administrator permissions to acess registry. Try to run setup "as administrator" (right-click on setup.exe and choose "Run as administrator", supply user and password if required) If you did so...
- Wed Jan 11, 2012 5:17 pm
- Forum: s300 / SManager
- Topic: Program to change RPM and Load indexes from S300 calibration
- Replies: 16
- Views: 10565
Re: Program to change RPM and Load indexes from S300 calibra
I had to execute the setup program, but after that the program ran well.
I noticed the links on post #1 were broken, so I made a new one, that includes the program and the setup.
Download the zip file, extract to some folder, run setup.exe, then S300Calculator.exe should run just fine.
Good luck!
I noticed the links on post #1 were broken, so I made a new one, that includes the program and the setup.
Download the zip file, extract to some folder, run setup.exe, then S300Calculator.exe should run just fine.
Good luck!
- Wed Jan 11, 2012 1:41 am
- Forum: s300 / SManager
- Topic: Program to change RPM and Load indexes from S300 calibration
- Replies: 16
- Views: 10565
Re: Windows 7
This was developed, tested and executed under XP, never used with Win7.Johnny_9 wrote:Having problems under windows 7 (VB6) run time...can you help?
I have a PC with Win7, I'll try to run it and see if I have any problems.
- Thu Mar 03, 2011 3:04 am
- Forum: s300 / SManager
- Topic: analog input 1 loosing signal
- Replies: 4
- Views: 4246
Thank you all, answering your tips: another input: I'll do that as a last resort, since I do not have the s300 prepared for analog input 2, I must put some resistors in there, first. heat: I have a strong suspicion about this, could be the radiator fan turning on to cause this? I also suspect a high...
- Wed Mar 02, 2011 6:33 am
- Forum: s300 / SManager
- Topic: analog input 1 loosing signal
- Replies: 4
- Views: 4246
analog input 1 loosing signal
Hi all, I had this post in another section, but I had no answer for a few days, so I'm posting here: I connected a Phormula KS4 knock sensor (http://www.phormula.co.uk/KnockMonitor-KS-4.aspx) to analog input 1 in S300 (I had to mount the 0.1uF capacitor in C42). This knock sensor displays engine noi...
- Sat Feb 26, 2011 1:32 pm
- Forum: Applications
- Topic: A10 output for VTEC?
- Replies: 2
- Views: 3071
analog input 1 question
I missed that, but for now I'm going to leave it with VTS, seems to be working OK. But now, I have another issue: On the same ocasion, I also connected a Phormula KS4 knock sensor (http://www.phormula.co.uk/KnockMonitor-KS-4.aspx) to analog input 1 in S300 (I had to mount the 0.1uF capacitor in C42)...
- Wed Feb 09, 2011 11:11 am
- Forum: Applications
- Topic: A10 output for VTEC?
- Replies: 2
- Views: 3071
A10 output for VTEC?
I have a 1998 Integra Type-R with turbo and S300. I wanted a led to light up when vtec was activated, so I wired it to s300 A10 connector. In smanager VTEC window, I configured "Enable aditional vtec output", and choosed "A10 (extra output)" in the combo box. It looked good in sm...
- Sun Oct 31, 2010 8:36 am
- Forum: s300 / SManager
- Topic: Program to change RPM and Load indexes from S300 calibration
- Replies: 16
- Views: 10565
Program to change RPM and Load indexes from S300 calibration
Hi all, As I mentioned in other topic, I needed a program to recalculate table values from SManager calibrations in case I want to change RPM and/or Load indexes without affecting the calibration behavior. I searched the net and, for my surprise, I couldn't find one. I asked in this and other forums...
- Sat Oct 16, 2010 3:22 am
- Forum: s300 / SManager
- Topic: Changing RPM and Load indexes
- Replies: 5
- Views: 2820
When you insert a new row or col in the middle, it will take the average value of the 2 row/col beside it. If you are adding a new row at the bottom or a new col at the right, it will take the previous row/col value. You will need to retune it. Thanks, that almost did it, but when I insert a new in...
- Mon Oct 11, 2010 9:16 am
- Forum: s300 / SManager
- Topic: Changing RPM and Load indexes
- Replies: 5
- Views: 2820