Search found 9 matches

by ripsta
Sun Oct 30, 2011 12:25 pm
Forum: S300 Calibrations
Topic: Tuning a H22a turbo
Replies: 1
Views: 1792

Tuning a H22a turbo

Trying to gather multiple tuners' experiences dyno street tuning a H22a turbo setup. What AFR have you seen make the most and safest power for the H22a motor? 12.1, 11.8, etc... What fuel pressure have you seen the best results at? 40psi, 50psi, etc... What temp on EGT (cylinder 3 before turbo) maki...
by ripsta
Sun Nov 15, 2009 3:52 pm
Forum: s300 / SManager
Topic: What are options with EGR
Replies: 1
Views: 1517

What are options with EGR

EGR sensor

If we block it off and remove the EGR, how can we eliminate the CEL light?

What are our options?
by ripsta
Sat Nov 07, 2009 5:08 pm
Forum: s300 / SManager
Topic: Playing with boost by gear
Replies: 0
Views: 1492

Playing with boost by gear

Playing with some boost settings today but ran into weird issue looking for help. See map and datalog attached. The first 20% of the datalog was run with boost by gear but it wouldn't boost to desired 12psi in 3rd. Switched it back to duty for the last 80% of the datalog. Car has H22 with lowered co...
by ripsta
Sat Oct 31, 2009 1:48 pm
Forum: S300 Calibrations
Topic: H22a turbo 13psi map
Replies: 0
Views: 2512

H22a turbo 13psi map

specs for map: H22a, 680cc injectors, t3/t4 turbo, 3inch exhaust, boost control 13psi This map was created by Brauning Motorsports, King George VA. The map will be good enough to get your car to a good tuner... I drove the car and the map needs lot of work but will get your car up and running to a g...
by ripsta
Mon Jan 19, 2009 5:21 pm
Forum: s300 / SManager
Topic: h22 turbo - Car won't start
Replies: 2
Views: 2820

Why would I not have fuel pressure by just switching the ECUs? Looking at the Accord vs Civic(P28) cars ECU pin outs they are 98% the same especially the PINS that would activate the fuel pump and everything that is important to run the car.... I'm not seeing what the possible wiring issue is... I w...
by ripsta
Mon Jan 19, 2009 4:18 pm
Forum: s300 / SManager
Topic: h22 turbo - Car won't start
Replies: 2
Views: 2820

h22 turbo - Car won't start

I’ve got my turbo Accord finished but have a possible wiring problem I could use the forums input to help address. It is a prelude motor with prelude wire motor harness plugged into Accord sub harness going to the ECU. I’m using S300 Hondata ECU for Reference. I’m attached a spreadsheet for the PIN ...
by ripsta
Sun Oct 19, 2008 11:57 am
Forum: S300 Calibrations
Topic: What sensors can be disabled in S300?
Replies: 1
Views: 2699

What sensors can be disabled in S300?

New to the S300 software and searched through the help file on sensor setup and couldn't find info on disabling sensors....Does anyone know what can be disabled.....reason might disable a few for emissions or error codes...
by ripsta
Thu Oct 16, 2008 8:15 am
Forum: s300 / SManager
Topic: Spark plugs
Replies: 92
Views: 151860

re:

Ok thanks for clearing that up; I'm supprised I've never heard of this issue at the drag strips, figured this would be a big issue more so than data logging....

So just to clarify, that for our honda's you are only recommending the three plugs in the first post, nothing else?
by ripsta
Wed Oct 15, 2008 11:49 am
Forum: s300 / SManager
Topic: Spark plugs
Replies: 92
Views: 151860

very interesting read

I've always heard use the racing colder plugs like R5671A-8 for our turbo honda motors.... So you guys listed three plugs on first post which one of those would replace a R5671A-8 for lets say a H22 with turbo setup - 16psi? So datalogging won't work at all without switching to these plugs? The arti...