Hondata

I had to reboot my Parallels on my Mac and also my Windows 10. My Smanager files will not open up, so I went to the Hondata website to download Smanager and I get a screen that says Hondata Software Hondata software requires Windows XP, Vista, 7, 8 or 10. It will not work on Android, iOS or Mac devi...

Does that mean I have to completely retune the car?

OK, found my paperwork - Invoice# 59150. Says "RESOLUTION: Corrupted Calibration Tested on bench and car." So how do I fix this??

Never mind, looks like I did get back to this. I do recall sending the S300 board in, but I don't remember if it fixed this issue at the time. Anyways, I'm still having the same issue. I'll have to look at some paperwork to see if you guys had to do anything with the board, or maybe you guys have th...

Not sure why I never got back to this post. The car has been down for a while, but I am still having the same issue. The serial number for the s300 board I believe is 35764. That is the number on the sticker that says S300.

OK, I just emailed that info.

35764

I am running CPR with this setup. Not sure if that makes a difference. I am also using Parallels that is partitioned on my Mac. It's running Windows XP, but this has never given me an issue in the past.

Did the same thing.

I turn the ignition on and press the throttle in which the vehicle bounces from 1500-2500 rpm. I then plug in my laptop with SManager already pulled up with the current calibration, while the vehicle is running. I will then press the arrow key "upload changes to the ECU". This usually does...

I don't know what you mean by a test upload. I tried to upload the calibration I am currently running.

I see. Try this one then.

I thought that I did. There is an attachment of it. Is that not the correct way to upload it?

Also noticed in Sensors that "REVL" and "IGNC" switch from off to on while the revs are bouncing from 1500 to 2500 rpm. I disabled the full throttle shift and the burnout rev limit, with no resolution.

Oh, and once I've plugged in SManager and got the revs working properlly, I can unplug my laptop with the car running and the revs continue to work until I turn off the ignition and turn it back on.