Search found 6 matches
- Fri Nov 24, 2006 9:23 am
- Forum: s300 / SManager
- Topic: 310cc injectors or 440cc injectors?
- Replies: 1
- Views: 1335
310cc injectors or 440cc injectors?
The injector fields under fuel trim show stock injector size 240, current 440 by default. The RC injectors shipped with our ITB are marked SL2-310. Am I correct in assuming these are 310cc injectors and should thus set the current injector size at 310? It seems obvious but I wanted to double check s...
- Fri Nov 24, 2006 8:31 am
- Forum: s300 / SManager
- Topic: Idle speed motor on ITBs not opening
- Replies: 2
- Views: 2251
Idle speed motor on ITBs not opening
I can't get the car to idle with the idle speed motor connected. It will idle when I disconnect it but very high. I've tested the idle motor outside of the car on a power supply and it's working (starts opening at about 5V and fully opens at 12V). But when connected on the car i'm not getting any vo...
- Tue Oct 24, 2006 12:15 pm
- Forum: s300 / SManager
- Topic: SManager V1.1.8 w/ ITB
- Replies: 1
- Views: 1277
SManager V1.1.8 w/ ITB
Is V1.1.8 w/ ITB out yet:?:
- Sun Oct 01, 2006 7:55 am
- Forum: s300 / SManager
- Topic: B18C w/ ITB & S300 won't idle
- Replies: 3
- Views: 4351
- Sat Sep 30, 2006 5:55 pm
- Forum: s300 / SManager
- Topic: B18C w/ ITB & S300 won't idle
- Replies: 3
- Views: 4351
B18C w/ ITB & S300 won't idle
Freshly installed S300 into a P28 ECU. I can't spot what's wrong in the datalogs. Car idles high (1500-2000) for about 10 secs and then dies. I have the stock map sensor and idle speed motor plumbed into the ITB. TPS is the TWM supplied unit and its output looks right except for it reading 2% when c...
- Sun Sep 24, 2006 6:33 pm
- Forum: s300 / SManager
- Topic: No lambda on B18C with ITB setup
- Replies: 1
- Views: 1805
No lambda on B18C with ITB setup
I've just finished the install of an S300 on a 2000 Si with a P28 ECU w/ conversion harness running a TWM ITB setup. I can't get the car to idle correctly. At first it would only stay running with light throttle input. Then I remembered to change the injector size in the fuel trim setting under para...