Search found 239 matches

by fonz600
Sun Jan 17, 2010 4:01 am
Forum: K-Pro / KManager
Topic: PRA/PRB Maps
Replies: 3
Views: 3401

viewtopic.php?p=36835&highlight=#36835

See there.

Although I do know of at least one of your local tuners who has done that in the past.
by fonz600
Sun Jan 17, 2010 3:56 am
Forum: K-Pro / KManager
Topic: KPRO Calibration Download Problem
Replies: 13
Views: 10453

Re: KPRO Calibration Download Problem

I could look at this for you if you want mate. Hi, Having a problem downloading a calibration from a KPRO onto my laptop. Drivers installed fine, KPRO is being detected etc. I initially was using Kmanager version 1.3.9 and having problems and then discovered that the map was created with and the sof...
by fonz600
Sun Apr 19, 2009 6:12 am
Forum: K-Pro Calibrations
Topic: check my datalog and tune
Replies: 2
Views: 2214

Your datalog doesn't match your tune. That's not the map in your car and you are running weak so don't be running it like that just now in WOT.
by fonz600
Tue Apr 07, 2009 4:48 am
Forum: K-Pro / KManager
Topic: not turning over... possible firmware problem??
Replies: 3
Views: 2170

Try clearing the security and then upload the map again.
by fonz600
Tue Apr 07, 2009 4:47 am
Forum: Applications
Topic: 2003 honda civic ep3 type r jdm spec
Replies: 2
Views: 3548

Have you uploaded a map to the ECU? If so which one?
by fonz600
Mon Apr 06, 2009 4:07 am
Forum: K-Pro Calibrations
Topic: Is this safe? (just getting KPRO)
Replies: 3
Views: 2770

Wait till you get the new O2 sensor fitted and then try out your kpro with that map and do a datalog.
Watch for knock and lean issues and fire your datalog up here for someone to take a look at it.
by fonz600
Sun Mar 29, 2009 11:07 am
Forum: K-Pro / KManager
Topic: KManager 1.3.5.4
Replies: 25
Views: 16709

Whenever I download the update using the link in this thread my AVG scanner throws up a virus warning stating there is a virus with the new .exe file.
The virus is Win32/Virut.Z

Anyone else get this?
by fonz600
Sun Mar 29, 2009 8:42 am
Forum: K-Pro / KManager
Topic: Can I copy calibration tables from different ECU type?
Replies: 7
Views: 6394

You can change a PRB map to a PRA map by opening it in notepad and changing the type number from type 3 to type 2. Dunno if it's the best way to do it though. Hondata will probably chime in as never heard a definite answer to changing type numbers through notepad and would like to hear if it's defin...
by fonz600
Sat Mar 21, 2009 3:01 am
Forum: K-Pro Calibrations
Topic: cranny, any help ?..
Replies: 5
Views: 3313

cranny, whats your email address? Could you look at something for me and let me know what you think. I'll explain more privately.
by fonz600
Fri Mar 20, 2009 5:45 pm
Forum: K-Pro Calibrations
Topic: JDM k20R Datalog... Whatcha Think
Replies: 21
Views: 8964

Ya i asked that same question in the other forum because i called hondata directly and got an answer that no, your altitude has nothing to do with the car running WOT in column 7. NA cars should runs columns 8 and above. I'm pretty surprised that hondata could not answer my question very well... du...
by fonz600
Tue Mar 17, 2009 8:35 am
Forum: K-Pro / KManager
Topic: Problems K20a turbo
Replies: 16
Views: 10331

cranny my problem is i cant go past 7 psi, or it will go all into pieces. I have a high compression since i am using a stock k20a (11.7:1 compression). I am using normal pump gas since here in malta there is no high octane available from the petrol station. I dont think normal pump gas would do for...
by fonz600
Mon Mar 16, 2009 2:18 pm
Forum: K-Pro / KManager
Topic: Problems K20a turbo
Replies: 16
Views: 10331

Your definitely experiencing boost cut. Your hitting 6PSI then getting the fuel cut.

Looking at other calibrations all of them have Hot Boost Cut set to 10PSI and all but 1 have Cold Boost Cut set to 10PSI.

I'd recommend speaking to cranny though mate as all my experience is on Supercharged and N/A.
by fonz600
Mon Mar 16, 2009 2:00 pm
Forum: K-Pro Calibrations
Topic: JDM k20R Datalog... Whatcha Think
Replies: 21
Views: 8964

Not really,

Use the lambda overlay if your not sure what your doing.
by fonz600
Sun Mar 15, 2009 3:51 pm
Forum: K-Pro Calibrations
Topic: JDM k20R Datalog... Whatcha Think
Replies: 21
Views: 8964

Your running lean dude. Quite lean in fact at some points.
by fonz600
Sun Mar 15, 2009 12:12 pm
Forum: K-Pro / KManager
Topic: Problems K20a turbo
Replies: 16
Views: 10331

Your crossover is set to 5600. Does it stop b4 then? I'm only theorising here, and cranny may pipe in whenever he feels like it as turbo's ain't something I'm experienced with, but although you are running 5PSI it is probably possible that you could still hit boost cut. A log would help though. 5PSI...