Search found 9 matches

by GangarTypeR
Mon Jun 08, 2020 5:23 pm
Forum: s300 / SManager
Topic: Car bogs down on partial throttle datalog included
Replies: 5
Views: 1527

Re: Car bogs down on partial throttle datalog included

ok i thought it was working because i calibrated it and it changed to -5 and 60 now im noticing it reads those values no matter if my foot is on the pledal or not any ideas of what may cause this
by GangarTypeR
Sun Jun 07, 2020 6:17 pm
Forum: s300 / SManager
Topic: Car bogs down on partial throttle datalog included
Replies: 5
Views: 1527

Re: Car bogs down on partial throttle datalog included

yes i calibrated it but i will try again thank you
by GangarTypeR
Sun Jun 07, 2020 4:04 pm
Forum: s300 / SManager
Topic: Car bogs down on partial throttle datalog included
Replies: 5
Views: 1527

Car bogs down on partial throttle datalog included

Hey so I have an issue that occurred only after changing out my skunk2 pro manifold and 70mm throttle body to an ultra street and 74mm. when i try to accelerate at partial throttle the cars rps drop for a second or 2 then come back on and over and over, revving a bit higher each time. when i floor t...
by GangarTypeR
Wed Jul 24, 2019 5:14 am
Forum: s300 / SManager
Topic: ok please help car sputters out full config and data logs
Replies: 2
Views: 979

Re: ok please help car sputters out full config and data logs

its just a basemap for a high comp gsr, i have changed a few things to match the build Ie; fuel injectors tuner wont take it until its running correctly. yeah i know its odd but when i go into the settings its reading it because i was able to get my throttle to read 0 at idle and 100 at wide open th...
by GangarTypeR
Sat Jul 20, 2019 10:07 am
Forum: s300 / SManager
Topic: ok please help car sputters out full config and data logs
Replies: 2
Views: 979

ok please help car sputters out full config and data logs

Ok so here's the deal the car starts up and runs (ran great to 40mph once) but as I'm driving it looses power and i have to let off the throttle and it comes back and i can accelerate again(all under 30ph) I've been reading and adjusting and trying to figure this out and i just now am mentally exhau...
by GangarTypeR
Sat Jul 20, 2019 9:37 am
Forum: s300 / SManager
Topic: Please help load and fuel pressure drop to 0
Replies: 5
Views: 1606

Re: Please help load and fuel pressure drop to 0

so I don't know whats up doesn't seem to be dropping to 0 anymore but i'm so confused got two data logs only difference was getting the tps set correctly on them and also the config here. thanks for any help
by GangarTypeR
Wed Jul 03, 2019 5:31 pm
Forum: s300 / SManager
Topic: Please help load and fuel pressure drop to 0
Replies: 5
Views: 1606

Re: Please help load and fuel pressure drop to 0

I can give you the calibration but as for a data log you just want this same chart but the video?
by GangarTypeR
Wed Jul 03, 2019 4:51 am
Forum: s300 / SManager
Topic: Please help load and fuel pressure drop to 0
Replies: 5
Views: 1606

Please help load and fuel pressure drop to 0

So attached is the graph of what's going on. I believe an injector is not dead timed right (Cheap injectors no flow chart) and its opening or closing at the wrong time and the ecu is trying to adjust the timing thus why its dropping right after. but basically the car sputters out and comes back its ...
by GangarTypeR
Mon Jul 01, 2019 11:59 am
Forum: S300 Calibrations
Topic: Odd basemap needed
Replies: 1
Views: 1370

Odd basemap needed

So I've been messing with this thing for 2 days and cant get it running smooth. If someone can help me with a base map or an idea I'd be super grateful. it fires right up but wideband says I' running extremely lean 22 to ---, but i' not sure if that's accurate. when i drive the car down my street to...