Search found 18 matches
- Tue Apr 26, 2022 9:05 pm
- Forum: K-Pro Calibrations
- Topic: 02 RSX-S JDM K24A
- Replies: 40
- Views: 4018
Re: 02 RSX-S JDM K24A
Great to here. Load this revision and create a normal driving log. -Ed Datalogged. Seemed a little bucky again in low rpms. uploaded DL. Cleaned it up down low. The tune looks good enough to drive around. Reach out to me when you're ready for a full ETune and we can tune every table in detail and s...
- Tue Apr 26, 2022 5:19 pm
- Forum: K-Pro Calibrations
- Topic: 02 RSX-S JDM K24A
- Replies: 40
- Views: 4018
Re: 02 RSX-S JDM K24A
The Tune is running on the richer side. I was not aware you had a check engine light. Make sure to fix that issue as i don't want it to effect the adjustments. Make sure you wired the crank sensor correctly. I believe the sensor is different from the k20 sensor. -Ed CEL only came on today during th...
- Mon Apr 25, 2022 9:57 pm
- Forum: K-Pro Calibrations
- Topic: 02 RSX-S JDM K24A
- Replies: 40
- Views: 4018
Re: 02 RSX-S JDM K24A
The Tune is running on the richer side. I was not aware you had a check engine light. Make sure to fix that issue as i don't want it to effect the adjustments. Make sure you wired the crank sensor correctly. I believe the sensor is different from the k20 sensor. -Ed CEL only came on today during th...
- Mon Apr 25, 2022 3:44 pm
- Forum: K-Pro Calibrations
- Topic: 02 RSX-S JDM K24A
- Replies: 40
- Views: 4018
Re: 02 RSX-S JDM K24A
Cleaned up some of the normal driving. The WOT looks good. Load the new file and create a normal driving log. -Ed Uploaded and datalogged. Idle seemed a little wonky on startup (Cold start) ive added a short DL of it just incase it helps you on your end. Noticed the low rpms were abit buckish when ...
- Sun Apr 24, 2022 5:29 pm
- Forum: K-Pro Calibrations
- Topic: 02 RSX-S JDM K24A
- Replies: 40
- Views: 4018
Re: 02 RSX-S JDM K24A
Cleaned up some of the normal driving. The WOT looks good. Load the new file and create a normal driving log. -Ed Uploaded and datalogged. Idle seemed a little wonky on startup (Cold start) ive added a short DL of it just incase it helps you on your end. Noticed the low rpms were abit buckish when ...
- Mon Apr 18, 2022 9:09 am
- Forum: K-Pro Calibrations
- Topic: 02 RSX-S JDM K24A
- Replies: 40
- Views: 4018
Re: 02 RSX-S JDM K24A
Cleaned up some more of the fuel. Let me know how the car is running. Load the new file and create a normal driving datalog and WOT datalog. -Ed Still noticing the improvements, the A/F is around 11.5-12 i noticed while datalogging, is that on the richer side? Yes, that is on the richer side. I nor...
- Fri Apr 15, 2022 11:09 am
- Forum: K-Pro Calibrations
- Topic: 02 RSX-S JDM K24A
- Replies: 40
- Views: 4018
Re: 02 RSX-S JDM K24A
Still noticing the improvements, the A/F is around 11.5-12 i noticed while datalogging, is that on the richer side?CalibratEd wrote: ↑Wed Apr 13, 2022 5:45 am Cleaned up some more of the fuel. Let me know how the car is running. Load the new file and create a normal driving datalog and WOT datalog.
-Ed
- Wed Apr 13, 2022 2:29 pm
- Forum: K-Pro Calibrations
- Topic: 02 RSX-S JDM K24A
- Replies: 40
- Views: 4018
Re: 02 RSX-S JDM K24A
Uploaded it and went for a nice drive, can for sure feel the improvments and car feels smoother and more responsive. one noticable change is the dipping when cruising and going on and off the gas, no longer has the dive. Did a WOT pull and another 3-4 pull on highway. Noticed the surge again after t...
- Tue Apr 12, 2022 12:32 pm
- Forum: K-Pro Calibrations
- Topic: 02 RSX-S JDM K24A
- Replies: 40
- Views: 4018
Re: 02 RSX-S JDM K24A
Double check that you do not have a vacuum leak. It could be that the tables needs to be fine tuned to make sure there is sufficient fuel so the car doesn't hunt to stay on after you let off a hard pull. I did more broad adjustments. The Car is running rich at WOT. Load the new file and create a WO...
- Mon Apr 11, 2022 2:49 pm
- Forum: K-Pro Calibrations
- Topic: 02 RSX-S JDM K24A
- Replies: 40
- Views: 4018
Re: 02 RSX-S JDM K24A
Seemed to have stopped once i let it sit for a few minutes, recorded another normal drive just to see if this DL says different.
- Mon Apr 11, 2022 1:41 pm
- Forum: K-Pro Calibrations
- Topic: 02 RSX-S JDM K24A
- Replies: 40
- Views: 4018
Re: 02 RSX-S JDM K24A
The map is running a bit lean on the top end. I did a few minor broad adjustments. The proper way to tune would be to go though every table and tune them. This is what your tuner will do. Load the new file and create a normal driving and WOT datalog. -Ed Did a datalog for WOT, and normal driving wi...
- Sat Apr 09, 2022 5:14 pm
- Forum: K-Pro Calibrations
- Topic: 02 RSX-S JDM K24A
- Replies: 40
- Views: 4018
Re: 02 RSX-S JDM K24A
Reach out when you have a working wideband. I can help you out. -Ed Thanks for the reply. Instsalled a factory wideband in, any special instructions while dataloging? Do i just post my .kal and a datalog after warmup? Datalog the car at normal driving and post the calibration and datalog file. -Ed....
- Sat Apr 09, 2022 1:40 pm
- Forum: K-Pro Calibrations
- Topic: 02 RSX-S JDM K24A
- Replies: 40
- Views: 4018
Re: 02 RSX-S JDM K24A
Also to add, exhaust is now a three inch ktuned oval, not 2.5 HKS like previous.
- Sat Apr 09, 2022 1:22 pm
- Forum: K-Pro Calibrations
- Topic: 02 RSX-S JDM K24A
- Replies: 40
- Views: 4018
Re: 02 RSX-S JDM K24A
Also i must add, i currently do not have 02 senors that are working so i cannot datalog at this time Reach out when you have a working wideband. I can help you out. -Ed Thanks for the reply. Instsalled a factory wideband in, any special instructions while dataloging? Do i just post my .kal and a da...
- Wed Feb 23, 2022 12:53 am
- Forum: K-Pro Calibrations
- Topic: 02 RSX-S JDM K24A
- Replies: 40
- Views: 4018
Re: 02 RSX-S JDM K24A
Also i must add, i currently do not have 02 senors that are working so i cannot datalog at this time