Hondata

+ 1. I also am wanting to do this but not sure what wire to tap the E21 brake switch wire onto on the wiper arm. Any help would be greatly appreciated.

Thanks, Ed

I know this was 2yrs ago but the same thing just happened to my Acuity TPS. It has been working great. All of a sudden WOT is 60. I had it scaled to 101. I just verified on Kpro it will read to 60 and then zero. Did my sensor crap out on me?

Thanks, Ed

Can you please share your wiring schematic? I need to wire my Magnus valve as well. Im already using nitrous 1 for my meth injection. Thanks in advance.

Ed

Hey guys today my EM2 decided it wasn’t going to take the key anymore. Insert the key and it will not turn. Long story short looks like I’m going to need to replace my ignition cylinder/switch. My question is would I still need to reprogram the keys? I’m running a Kpro V4.

Thanks, Ed

This is what I have been filling up with nothing lower.

Hondata wrote: ↑Mon Sep 14, 2020 3:13 pm Probably because E85 is not 85% ethanol. Where are you seeing 78%? That's what I get in CA year round.

My krpo e85 content is is reading 78%.

Thanks, Ed

Spunkster wrote: ↑Mon Sep 14, 2020 9:12 am How are you draining the tank?

I disconnected my fuel line and ran it into a VP can several times. Also by driving the car the car and then filling up with e85.
Thanks,Ed

Sorry to thread jack but I'm having the same issue. Did you ever figure this out? I can't take advantage of my full tune till it reaches 85%. Today I added more e85 and it reached 81 then slowly dropped down back to 78%

Thanks, Ed

Hey guys. My e85 content reading seems low. I have drained the 93 and filled up with e85 multiple times now. I have ran straight e85 and test it before pumping it into the car and it always test at 90-95%. Why is my e85 content reading only at 78%? Today after I filled with e85 it was reading 81% an...

Bringing this back from the dead. I have the same exact problem with mine. Which wires were reversed that causes this issue?
Thanks, Ed

Hey guys, wondering if anyone has a Kal. for a K20z3 with headers(1320), exhaust, 70mm TB and 3.5 intake? I'm currently running the RSX basemap.

Thanks in advance, Ed

Hey guys. Can someone please help me identify which version I have?
Thanks, Ed