Hondata

Good Day,

Please see my post from 11/8/20 as it has the calibration posted.

Thanks.

Great! Please supply specific instructions on how you were able to achieve App Wideband Display on your end. Indicate which settings you enabled with respect to how your wideband is wired in and I will follow suit..

Thanks again for you help!!!

Good Evening,

I am using a PND auto ecu.

Yes. I have been looking at the AF display as well and there is an output signal that responds accordingly to WB.

Screen shot attached shows a value of ~17 aka lean.

Please advise if any further can be looked at.

Just so I'm on the same page as you... Where am I supposed to look at to verify if it's reading correctly? I have been relying on the sensors table under ANALOG 0 for the input signal. I have A/F fluctuation @ AN0 which leads me to think that it's reading correctly. Is that not where I'm supposed to...

Understood. I just changed the setting to external and the mobile app still shows a stuck value of 14.7

Any other suggestions?

Thanks for the response... Just to clarify, by changing to "external wideband input" in the "closed loop parameter", will it affect how the fuel content is being read/delivered by the ecu? I was under the impression that wideband were only for datalogging and monitoring purpose o...

Good Evening, Thank you for your response. When you say "There is no reading in KManager either", are you referring to the Analog 0 slot? On my end I have AF reading at that input. Attached you will see that there are readings being displayed at that input. The wideband is wired as such: s...

Good Evening, I will like to reiterate that in kmanager everything is displaying properly. Only issue i'm having is not being able to get the analog inputs displayed on the mobile app. I did hear back from someone that handles mobile app inquiries, and they informed me that it's not an app issue. I ...

Good Day, I'm working through the mobile app and I'm noticing that the wideband display stays stuck on 10.7. On kmanager I do have proper display for A/F-does anyone know if there are any settings I may be missing? I browsed the forums and someone went through a similar issue-they stated to have cha...

Trying to bring this back from Dead. I am currently going through this same issue. Can anyone elaborate on what a fix could be? I'm not too sure what was meant by "mixture adjustments". Thanks in advance.

Is it a problem that your O2 signal is reading 0.00V (and current -37mA) with a Open-Driving Fuel Status????

any luck?