Search found 10 matches

by Digenex
Fri Mar 08, 2024 2:54 pm
Forum: Applications
Topic: ITR DC2 issue wideband voltage offset sometimes shifting
Replies: 4
Views: 1303

Re: ITR DC2 issue wideband voltage offset sometimes shifting

Hi, yes I was aware of that so the LC2 is programmed to send between 0v and 3.7v (22 afr) to cover that.
by Digenex
Fri Mar 08, 2024 2:17 pm
Forum: Applications
Topic: ITR DC2 issue wideband voltage offset sometimes shifting
Replies: 4
Views: 1303

Re: ITR DC2 issue wideband voltage offset sometimes shifting

Going trough the stock narrowband wire D14
by Digenex
Fri Mar 08, 2024 12:13 pm
Forum: Applications
Topic: ITR DC2 issue wideband voltage offset sometimes shifting
Replies: 4
Views: 1303

ITR DC2 issue wideband voltage offset sometimes shifting

Hi, I'm running a innovate LC2 wideband and a P28 hondata s300 v3 setup for a few years without issues. Recently I notice when I start the car and after the wideband warms up, the AFR on the Innovate wideband gauge is different from the one I see on hondata (using an android HUD so I can see the hon...
by Digenex
Sat Dec 29, 2018 10:44 am
Forum: s300 / SManager
Topic: CEL after upload while running
Replies: 11
Views: 3347

Re: CEL after upload while running

Hi, late response but I eventually took some time to troubleshoot again and it was indeed the bad pin 6 that was the issue.
the problem is you solder from the back side, but the connection with the board is made trough the front side.
by Digenex
Sat Dec 29, 2018 10:39 am
Forum: Hondata Mobile
Topic: Hondata Mobile APK 1.5 (Android) for Dash
Replies: 51
Views: 55411

Re: Hondata Mobile APK 1.5 (Android) for Dash

Just installed V1.5 on my android HU and runs great!! very good update for us European / metric system users :-D
by Digenex
Thu Apr 05, 2018 11:49 am
Forum: s300 / SManager
Topic: CEL after upload while running
Replies: 11
Views: 3347

Re: CEL after upload while running

https://s14.postimg.org/vps0ice2l/IMG_20180405_202817.jpg https://s14.postimg.org/ozbj8wyml/IMG_20180405_202925.jpg https://s14.postimg.org/42fb498bh/IMG_20180405_203004.jpg fyi; on the bottom row number 6 (counting from right) is soldered by me. It looked a bit different from the rest so I tried t...
by Digenex
Tue Apr 03, 2018 11:29 am
Forum: s300 / SManager
Topic: CEL after upload while running
Replies: 11
Views: 3347

Re: CEL after upload while running

ok, thanks for confirming. Do you know what capacitors are responsible for the issue I have? (no datalog, to much fuel probably, iacv buzz at startup...)
by Digenex
Sun Apr 01, 2018 5:18 am
Forum: s300 / SManager
Topic: CEL after upload while running
Replies: 11
Views: 3347

Re: CEL after upload while running

Hi, new update: I changed back to stock injectors so I could try the stock P73 ecu, and it works normally with this setup. plugged the p28 back in with a stock map and the car idles a bit rough (but better as with the 550cc's) but with a lot of smoke and no datalogging or live sensors on smanager. (...
by Digenex
Sat Mar 31, 2018 2:16 am
Forum: s300 / SManager
Topic: CEL after upload while running
Replies: 11
Views: 3347

Re: CEL after upload while running

Hi, yes I did that also/ Uploaded a stock map with only injector size adjusted when the car wasn't running. it did not fix the problem unfortunately. What I noticed now: when the car has been sitting for 2 days, I can get it to start but idles extremely rough. i have to part throttle it to keep it r...
by Digenex
Wed Mar 28, 2018 1:56 pm
Forum: s300 / SManager
Topic: CEL after upload while running
Replies: 11
Views: 3347

CEL after upload while running

Hi, I have a P28 with s300 V3 running on a b18c6 turbo. what happened was, when test driving, i changed the map during idle and uploaded it to the ecu. I don't know the exact moment but the car suddenly stalled. without any sign (like you turn off the ignition) the only thing i can still remember wa...