Search found 10 matches
- Fri Mar 08, 2024 2:54 pm
- Forum: Applications
- Topic: ITR DC2 issue wideband voltage offset sometimes shifting
- Replies: 4
- Views: 1305
Re: ITR DC2 issue wideband voltage offset sometimes shifting
Hi, yes I was aware of that so the LC2 is programmed to send between 0v and 3.7v (22 afr) to cover that.
- Fri Mar 08, 2024 2:17 pm
- Forum: Applications
- Topic: ITR DC2 issue wideband voltage offset sometimes shifting
- Replies: 4
- Views: 1305
Re: ITR DC2 issue wideband voltage offset sometimes shifting
Going trough the stock narrowband wire D14
- Fri Mar 08, 2024 12:13 pm
- Forum: Applications
- Topic: ITR DC2 issue wideband voltage offset sometimes shifting
- Replies: 4
- Views: 1305
ITR DC2 issue wideband voltage offset sometimes shifting
Hi, I'm running a innovate LC2 wideband and a P28 hondata s300 v3 setup for a few years without issues. Recently I notice when I start the car and after the wideband warms up, the AFR on the Innovate wideband gauge is different from the one I see on hondata (using an android HUD so I can see the hon...
- Sat Dec 29, 2018 10:44 am
- Forum: s300 / SManager
- Topic: CEL after upload while running
- Replies: 11
- Views: 3358
Re: CEL after upload while running
Hi, late response but I eventually took some time to troubleshoot again and it was indeed the bad pin 6 that was the issue.
the problem is you solder from the back side, but the connection with the board is made trough the front side.
the problem is you solder from the back side, but the connection with the board is made trough the front side.
- Sat Dec 29, 2018 10:39 am
- Forum: Hondata Mobile
- Topic: Hondata Mobile APK 1.5 (Android) for Dash
- Replies: 51
- Views: 55546
Re: Hondata Mobile APK 1.5 (Android) for Dash
Just installed V1.5 on my android HU and runs great!! very good update for us European / metric system users :-D
- Thu Apr 05, 2018 11:49 am
- Forum: s300 / SManager
- Topic: CEL after upload while running
- Replies: 11
- Views: 3358
Re: CEL after upload while running
https://s14.postimg.org/vps0ice2l/IMG_20180405_202817.jpg https://s14.postimg.org/ozbj8wyml/IMG_20180405_202925.jpg https://s14.postimg.org/42fb498bh/IMG_20180405_203004.jpg fyi; on the bottom row number 6 (counting from right) is soldered by me. It looked a bit different from the rest so I tried t...
- Tue Apr 03, 2018 11:29 am
- Forum: s300 / SManager
- Topic: CEL after upload while running
- Replies: 11
- Views: 3358
Re: CEL after upload while running
ok, thanks for confirming. Do you know what capacitors are responsible for the issue I have? (no datalog, to much fuel probably, iacv buzz at startup...)
- Sun Apr 01, 2018 5:18 am
- Forum: s300 / SManager
- Topic: CEL after upload while running
- Replies: 11
- Views: 3358
Re: CEL after upload while running
Hi, new update: I changed back to stock injectors so I could try the stock P73 ecu, and it works normally with this setup. plugged the p28 back in with a stock map and the car idles a bit rough (but better as with the 550cc's) but with a lot of smoke and no datalogging or live sensors on smanager. (...
- Sat Mar 31, 2018 2:16 am
- Forum: s300 / SManager
- Topic: CEL after upload while running
- Replies: 11
- Views: 3358
Re: CEL after upload while running
Hi, yes I did that also/ Uploaded a stock map with only injector size adjusted when the car wasn't running. it did not fix the problem unfortunately. What I noticed now: when the car has been sitting for 2 days, I can get it to start but idles extremely rough. i have to part throttle it to keep it r...
- Wed Mar 28, 2018 1:56 pm
- Forum: s300 / SManager
- Topic: CEL after upload while running
- Replies: 11
- Views: 3358
CEL after upload while running
Hi, I have a P28 with s300 V3 running on a b18c6 turbo. what happened was, when test driving, i changed the map during idle and uploaded it to the ecu. I don't know the exact moment but the car suddenly stalled. without any sign (like you turn off the ignition) the only thing i can still remember wa...