Hondata

Hello Is OBDII Port still available after Kpro4 on installed on PND ECU? I am trying to capture some engine datas to overlay it on Track Addict Lap timer app. Is there any other existing video capture capable iOS app that can connect to Kpro4 via Bluetooth that works much like the older discontinued...

Hi all,
Has anyone know how to merge / cascade datalog onto a video, something like hondatalogger did back in the day on a Kpro4?

https://www.hondata.com/?_route_=hondalogger

Is there anyway to change the units on the Mobile App?
Also, can we choose what gauges to be displayed and layout?

Great idea..
But we need to know a lot more insight of what's involved.. few photos will be helpful...

Hi Spunkster/Hondata I've since upgraded the kmanager software to 4.3.6.0 on my laptop. Still the same, no improvement. I can make changes to calibration file, and uploaded it to kpro4, no error was found. I know the upload was successful as I was changing the idle from 750rpm to 1000rpm and yes it ...

Hi Spunkster,
It's Kpro V4.

- serial number K-Pro : 45741
- version of software being used (from Help, About): 4.3.4.0

Hi Hondata, It seems like I am unable to download the existing calibration that is on my ECU. No error appears when I click "Download". It looks like Kmanager downloaded calibration that is same as stock PND Base calibration. Obviously I have changed a lot of the parameters such as B21 Boost control...

Hi guys,
Anyone has a dyno tuned map for K24A2 that willing to share?
Need a resonable tuned map to start with.

Thanks

Hi Hondata, I have recently swapped a K24A3 into my RSX Base with 5 speed transmission. Everything were transferred over from K20A3 to the K24A3 (everything on PRB intake manifold, knock sensor and coolant temp sensor, and crank angle sensor). Do I need to change anything else apart from enrichment ...

So is it just the calibration file that need to be configured? under which section changes need to be made to the calibration file?

Thanks

Hi Hondata,
As title, can 02-04 PND Kpro4 works with 05-06 Type S Gearbox?
I am going to upgrade the stock 5-speed gearbox to a 6-speed gearbox from 05-06 Type S. My question is how to make the speedo works?

Thanks.

I've used the default ID1000 table and fire it up, works great.. idle dead stable at 13.8-14.0AFR with 0% overall fuel trim.

Thanks Hondata.

They are EV14

Just to add on, these injectors have been tested flowing 1000cc @ 43.5psi 3bar.

I have not installed fuel pressure gauge, and still on stock fuel pump.

The injector is Raceworks (Australian brand) which uses Bosch injector core.

Attached is the dead time setup from the manufacturer. I've entered the values on 43.5psi (3bar).