Search found 6 matches

by frostvectron
Mon Apr 17, 2017 6:07 pm
Forum: s300 / SManager
Topic: On-board datalogging problems
Replies: 9
Views: 1267

Re: On-board datalogging problems

Will give it a shot. As a last ditch, I tried to use the "erase ECU" function to try and clear it and start over in case something was weird. The progress bar shows up and it gets to almost max and I get an error message saying "ECU did not erase". Is that normal? Seemed weird to me. Tried several t...
by frostvectron
Thu Apr 13, 2017 3:58 pm
Forum: s300 / SManager
Topic: On-board datalogging problems
Replies: 9
Views: 1267

Re: On-board datalogging problems

Uploaded.

170410_onboard_datalog2.s3d is the log obtained when using a manual switch at pin B8 with the car running poorly.
170410_laptop_datalog_short.s3d is the log obtained from the laptop logging and the car running very well.
by frostvectron
Wed Apr 12, 2017 5:27 pm
Forum: s300 / SManager
Topic: On-board datalogging problems
Replies: 9
Views: 1267

Re: On-board datalogging problems

I've tried in two different ways, both with the same result:

1) via manual switch Pin B8
2) Editing calibration to set on-board datalogging to "always on"
by frostvectron
Wed Apr 12, 2017 2:03 am
Forum: s300 / SManager
Topic: On-board datalogging problems
Replies: 9
Views: 1267

Re: On-board datalogging problems

Helpful. Okay, let me ask this, then: is on-board datalogging fundamentally different (in terms of what is being used on the ecu or s300v3 board) than recording data via USB on a laptop? I have issues with one and not the other. Based off my observations, something is clearly changing when onboard l...
by frostvectron
Mon Apr 10, 2017 4:31 pm
Forum: s300 / SManager
Topic: SManager software requests
Replies: 308
Views: 106274

Re: SManager software requests

Can nonlinear widebands be supported again? (i.e. more points available in the voltage/lambda conversion table... old versions had it).
by frostvectron
Mon Apr 10, 2017 4:13 pm
Forum: s300 / SManager
Topic: On-board datalogging problems
Replies: 9
Views: 1267

On-board datalogging problems

Hi, I am running the S300 v3 and am having issues with datalogging. When I run the car connected to my laptop and recording, it runs great without any issues. I had connected a switch to the power steering input at B8 to use the on-board datalogging function. When I test drove it like this, the car ...